Allicdata Part #: | FCX495TC-ND |
Manufacturer Part#: |
FCX495TC |
Price: | $ 0.18 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Diodes Incorporated |
Short Description: | TRANS NPN 150V 1A SOT89 |
More Detail: | Bipolar (BJT) Transistor NPN 150V 1A 100MHz 1W Sur... |
DataSheet: | FCX495TC Datasheet/PDF |
Quantity: | 1000 |
4000 +: | $ 0.16078 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Transistor Type: | NPN |
Current - Collector (Ic) (Max): | 1A |
Voltage - Collector Emitter Breakdown (Max): | 150V |
Vce Saturation (Max) @ Ib, Ic: | 300mV @ 50mA, 500mA |
Current - Collector Cutoff (Max): | 100nA |
DC Current Gain (hFE) (Min) @ Ic, Vce: | 100 @ 1mA, 10V |
Power - Max: | 1W |
Frequency - Transition: | 100MHz |
Operating Temperature: | -65°C ~ 150°C (TJ) |
Mounting Type: | Surface Mount |
Package / Case: | TO-243AA |
Supplier Device Package: | SOT-89-3 |
Base Part Number: | FCX495 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The FCX495TC is an NPN silicon plastic transistor that is best used in a variety of applications. It is designed to work as an amplifier, switch, or a gain or current regulator. The Thermal Resistance Junction to Case is 50 (degrees C/W), the Maximum Collector Power Dissipation is 1W, and the Maximum Collector-Emitter Voltage is 30V.Due to its small size and low-power requirements, the FCX495TC is often used in applications that require a high current and low noise. For example, in communication and audio applications, the FCX495TC is often used to amplify signals and reduce noise.
The FCX495TC is composed of an N-type contact base, a P-type collector, and an N-type emitter. Its working principle is based on the flow of electrons between the P-type collector and the N-type emitter. The electrical current is driven through the emitter, across the base, and then to the collector. This flow of electrons causes current amplification within the transistor. The amount of current amplification is determined by the ratio of the Collector Current to the Base Current, known as the Current Gain.
The FCX495TC is commonly used in applications that require current amplification or signal switching. It is also used in amplifiers and other audio and communication applications where signal amplification and noise reduction are needed. In addition, it is also used as a gain or current regulator in circuits where accurate control of current is needed.
In terms of its design, the FCX495TC is packaged in a dual-in-line surface mount form factor. As such, it occupies relatively little space, making it ideal for applications where space is limited. Furthermore, due to its low power requirements, it is also highly suitable for applications that demand low power consumption.
In conclusion, the FCX495TC is an NPN silicon plastic transistor with a variety of applications. It offers high current and low noise performance, making it ideal for communication and audio applications. Its small size and low power requirements make it suitable for applications that demand little space and power consumption, such as gain or current regulator circuits.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
FCX491TA | Diodes Incor... | -- | 1000 | TRANS NPN 60V 1A SOT-89Bi... |
FCX495TA | Diodes Incor... | -- | 1800 | TRANS NPN 150V 1A SOT-89B... |
FCX495TC | Diodes Incor... | 0.18 $ | 1000 | TRANS NPN 150V 1A SOT89Bi... |
FCX458TA | Diodes Incor... | -- | 1000 | TRANS NPN 400V 0.225A SOT... |
FCX493TA | Diodes Incor... | -- | 1000 | TRANS NPN 100V 1A SOT-89B... |
FCX491ATA | Diodes Incor... | -- | 23000 | TRANS NPN 40V 1A SOT-89Bi... |
GENERAL-PURPOSE TRANSISTORBipolar (BJT) ...
TRANS PNP DARL 30A 120V DIEBipolar (BJT)...
TRANS PNP DARLINGTON DIEBipolar (BJT) Tr...
TRANS GENERAL PURPOSE TO-218Bipolar (BJT...
TRANS PNP 140V 1ABipolar (BJT) Transisto...
TRANS NPN 700V 3A I2PAKBipolar (BJT) Tra...