FD800R17KF6CB2NOSA1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

FD800R17KF6CB2NOSA1 Application field and Working Principle

FD800R17KF6CB2NOSA1are Insulated Gate Bipolar Transistor (IGBT) modules that are suitable to handle high current and high voltages, ranging from 1200 Amps and 1700 Volts. The main applications of FD800R17KF6CB2NOSA1 are in medium and high power conversion applications, such as motor drives, solar inverters, DC to AC converters, UPS systems, etc.

The FD800R17KF6CB2NOSA1 IGBT module is made up of 4 IGBTs, 4 parallel anti-parallel diodes, and other support components. By connecting these IGBTs and diodes in parallel and connecting them in series, very high current up to 1200A and voltage up to 1700V can be achieved.

The main feature of FD800R17KF6CB2NOSA1 IGBTs is their ability to quickly switch the IGBTs on and off, that is, the control of the on and off states of the IGBTs. This is achieved through an internal Gate drive circuit which is powered by a DC voltage. This internal gate drive circuit takes the input from a feedback or control signal and turns it into a voltage that can be used to control the IGBT.

The on state of the IGBT can be controlled by sending a positive voltage to the Gate terminal of the IGBT, and once the Gate of the IGBT is energized, the IGBT is turned on, carrying a current from its drain to its source. When the desired on state is achieved, the Gate voltage can then be decreased, which will cause the IGBT to turn off and stop carrying the current.

The current in the IGBTs can be controlled accuately by using the existing feedback system in the IGBT module. The feedback system is usually made up of two components, one sensing the current at the low side of the module, and the other sensing the current at the high side of the module.

The FD800R17KF6CB2NOSA1 module can also be used in a variety of applications which require a high voltage and current switching, such as motor drives, solar inverters, DC to AC converters, UPS systems, etc. In all of these applications, the main purpose of the IGBTs is to control the current in a very precise manner, with minimum losses and with a fast response time. The IGBTs are also used for protecting sensitive loads, such as transistors, integrated circuits, and other power sensitive components, from over currents, over voltages, and other electrical damages.

The FD800R17KF6CB2NOSA1 module is a highly advanced IGBT module that provides reliable operation even in the toughest of applications. Its internal gate drive circuit ensures precise control of the IGBTs and its feedback system ensures accurate current control. The high current and voltage handling capability makes it suitable for a wide variety of high-power applications. All these features make the FD800R17KF6CB2NOSA1 a highly sought after module for various applications.

The specific data is subject to PDF, and the above content is for reference