FHP3232IM8X Integrated Circuits (ICs)

Current - Input Bias:	1.8µA
Base Part Number:	FHP3232
Supplier Device Package:	8-SOIC
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply, Single/Dual (±):	2.7 V ~ 12 V, ±1.35 V ~ 6 V
Current - Output / Channel:	100mA
Current - Supply:	2.5mA
Voltage - Input Offset:	1mV
Series:	--
-3db Bandwidth:	85MHz
Gain Bandwidth Product:	260MHz
Slew Rate:	400 V/µs
Output Type:	Rail-to-Rail
Number of Circuits:	2
Amplifier Type:	Voltage Feedback
Part Status:	Obsolete
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Instantaneously present industrial equipment increasingly demands precise current and voltage regulation and enhanced signal integrity, addressing such demands are state-of-the-art linear electronic components. Specifically, FHP3232IM8X is one of themost recent model of instrumentation amplifiers, which is used for signal conditioning and signal amplification purposes. The truth is that instrumentation amplifiers are heavily used for their accurate output voltage which is essential for applications such as active filtering, signal conditionings, and data acquisition.For example, FHP3232IM8X can be used to precisely measure the extremely small upcoming signal in order to achieve desired results which requires accurate output voltages. In short, the output voltage of instrumentation amplifiers can be regulated in order to achieve specific performance. This type of regulation takes place when it is combined with the appropriate feedback circuit. FHP3232IM8X is equipped with 8-pin DIP, which is ideal for printed circuit board assemblies and can be used as a single chip solution for offset compensation for high performance applications. Looking at it more closely, the FHP3232IM8X does not incorporate any integrated circuits and is mainly a passive component. Due to its superior characteristics, FHP3232IM8X is widely used in applications which require power supplies of greater than 8V. The working principle of FHP3232IM8X is simple and it consists of three major components; the input, the feedback voltage divider, and the output. The working principle is further explained with a simple diagram. To begin, the amplifier part of FHP3232IM8X acts as a differential amplifier which is utilized to measure the incoming voltage and consequently producing an output. This amplifier is comprised of two input resistors, one feedback resistor and one output buffer. The differential amplifier is then followed by the feedback voltage divider which will adjust the output level of FHP3232IM8X. The feedback voltage divider is composed of two resistors, a feedback resistor and a ground resistor. The output level can be controlled by changing the value of the feedback resistor to achieve desired performance. When the input voltage is applied, the output voltage of the amplifier is then determined. This output voltage is then applied to the feedback voltage divider and the output voltage level is adjusted accordingly. Finally, the output of the FHP3232IM8X is buffered with the output buffer. The buffer is used to reduce the impedance of the amplifier and improve the stability of the output voltage. The FHP3232IM8X can offer superior performance in terms of output stability, low noise, and high common mode rejection, among other features. The combination of these features make FHP3232IM8X an ideal choice for applications such as active filtering, instrumentation and data acquisition. The FHP3232IM8X is an innovative addition to the field of linear electronic components. It is equipped with advanced features and can be used to provide precise voltage regulation. Its combination of multiple components into one single unit makes it an ideal choice for both industrial and consumer applications, such as active filtering, signal conditionings, and data acquisition. Despite the inherently complex nature of such products, many users of FHP3232IM8X find them easier to use thanks to their easy-to-follow instructions in the manual of the kit. Furthermore, this product is affordable and can easily be ordered online. In conclusion, the FHP3232IM8X is an excellent choice of linear electronic component which provides accurate and reliable performance. Its components are easily installed, and the output can be regulated to achieve specific performance. Its combination of enhanced features, accurate voltage regulation, and affordability has made it an ideal choice for many industrial and consumer applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description