FI168B259762-T Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The FI168B259762-T is a RF filter with a wide range of applications. It is a band pass filter with a low insertion loss, making it suitable for commercial, industrial, and residential applications. The filter has a frequency range of 0-2.6 MHz, with a lower loss of 0.5 dB at 0 kHz and a higher loss of -1 dB at 2.6 MHz. It has an insertion loss of 0.3 dBs and is designed for portable and outdoor applications.

The filter is used in a wide range of applications including, but not limited to, cellular base stations, switch systems, Wi-Fi systems, satellite links, wireless communications systems, navigation systems, radios, TVs, and amateur radio. It is an important component in any communication system, and it is used to ensure signals do not interfere with each other by allowing only certain frequencies to pass through the filter.

The working principle of the filter is based on the concept of the Smith Chart. The Smith Chart is a diagram used in electrical engineering to calculate electrical impedance. It is based on a linear transformation that is applied to the Cartesian coordinates of the impedance plane. The transformation is used to remove the linear component of the impedance, allowing only the purely reactive component to remain.

The Smith Chart is then used to calculate the impedance of the RF filter and determine how much signal is passing through. The chart is also used to calculate the insertion losses in the filter and the source impedance. The chart is then used to determine the best-suited filter for the application and to optimize the design.

The FI168B259762-T is a high-performance RF filter that is suitable for a wide range of applications. It has a low insertion loss and high selectivity, making it an ideal choice for use in a wide variety of communication systems. It is a band pass filter, allowing only certain frequencies to pass through and is designed for use in portable and outdoor applications. The working principle behind the device is based on the Smith Chart, which is used to calculate the impedance of the filter and determine the best-suited filter for the application.

The specific data is subject to PDF, and the above content is for reference