FI168P157519-T RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Diplexers is a type of high frequency devices that selectively passes two different frequencies at the same time or separately. They are used to combine or separate the signal from two different oscillating circuits. The FI168P157519-T is an RF Diplexer optimized for UHF/ISM frequency bands in various applications, including but not limited to Bluetooth and Wi-Fi components. It is a part of Fedeltronics\' family of UHF Diplexers.

The FI168P157519-T has a wide frequency range between 300MHz and 3GHz and the pass bands for both the upper and lower frequency ranges are very narrow, optimizing the signal transmission through the diplexer. It also exhibits good impedance matching throughout its operational frequency range, making it an ideal choice for use in various applications.

The FI168P157519-T uses a proprietary technology to achieve very low insertion loss, with the return loss being greater than 20dB across frequencies. The diplexer provides a maximum input power of 10mW, making it ideal for applications with low power requirements. Since it is a passive device, it does not require any external active components for operation.

The working principle of a RF Diplexer is fairly simple. It has two separate ports that each pass a different frequency range. The two ports are built on the same substrate, so that when a signal is sent to one port, it is filtered and only the desired frequency passes through. The other port filters out all the frequencies that do not match its preferred frequency range, to ensure that the frequency required by the application is separated from the rest of the signals.

The FI168P157519-T is suitable for multiple applications, such as automated meter reading, wireless audio systems, monitoring and control systems, network data access, TV broadcast systems, and other applications that require signal transmission in UHF/ISM applications. Apart from this, the diplexer can also be used in RF applications where the device is not intended to control or filter the signal, but simply redirect it to different ports of an antenna or radio equipment.

In conclusion, the FI168P157519-T is an ideal RF Diplexer that can be used in multiple UHF/ISM applications due to its low insertion loss and good impedance matching. Its wide frequency range and tight pass band make it an excellent choice for applications that require high signal separation. Moreover, the device can be used in applications where signal redirection is necessary, without active components, making it an optimal solution for RF designs.

The specific data is subject to PDF, and the above content is for reference