FMP100FRE52-57R6

Through hole resistors are an essential component of electrical and electronic circuits. As the name suggests, they are installed in a through-hole, preventing contact with other components on the board. Through hole resistors are used to resist electric current, convert electric energy into heat energy, and distribute the current across the board as needed. FMP100FRE52-57R6 is an example of a through hole resistor. This article will discuss the application field and working principle of FMP100FRE52-57R6 resistors.

FMP100FRE52-57R6 is a through hole resistor produced by FMR Corporation. It consists of a resistive element, two electrodes, and a protective metal casing. The resistive element is made of high-quality thick film ceramics with a temperature coefficient of less than 0.002ppm/K. It is rated at 100 Ohms at 25°C and its power rating is 0.25W. The thickness of the electrodes is 0.1mm, and the length of the lead is 2.0mm. The casing is made from metal and is resistant to oxidation and corrosion.

FMP100FRE52-57R6 resistors are commonly used in automotive applications. They are used in spark plug control units, ignition control modules, and throttle positions sensors to accurately measure voltage and current levels. Their high power rating and small size make them suitable for high-heat, high-current applications. In addition, their temperature coefficient of 0.002ppm/K provides consistent performance regardless of ambient temperatures.

The working principle of FMP100FRE52-57R6 resistors is based on Ohm’s law. Ohm’s law states that the voltage V across a resistive element is equal to the current I passing through it, multiplied by the resistance R. Therefore, the voltage V across a resistor is directly proportional to the current I flowing through it. The resistance R of a resistor is set at the time of manufacture, so the only way to change its resistance is to change the temperature. FMP100FRE52-57R6 resistors are designed to remain accurate and stable even at extreme temperatures.

In addition, FMP100FRE52-57R6 resistors are designed with a protective metal casing to protect against shock, vibration, and dust. The metal casing also helps dissipate heat, allowing the resistor to maintain its accuracy and stability despite high temperatures. This makes them suitable for use in high-temperature, high-power applications where accuracy and stability are critical.

To summarize, FMP100FRE52-57R6 resistors are commonly used in automotive applications. Their high power rating and small size make them suitable for high-heat, high-current applications. In addition, their temperature coefficient of 0.002ppm/K ensures accuracy and stability even at extreme temperatures. Finally, the protective metal casing helps dissipate heat, further ensuring accuracy and stability in high-temperature, high-power applications.