FMP100FTE52-7K87

Series:	FMP
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	7.87 kOhms
Tolerance:	±1%
Power (Watts):	1W
Composition:	Metal Film
Features:	Flame Proof, Safety
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.094" Dia x 0.248" L (2.40mm x 6.30mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are typically found in a variety of electronics applications. They are used to regulate current and voltage, sequentially control electronic devices, and to protect against overloading and shorting. The FMP100FTE52-7K87 is a through hole resistor designed for use in industrial applications, and these components are manufactured to very tight tolerances and high quality control standards.The FMP100FTE52-7K87 is a small, cylindrical resistor with a rectangular face. The component measures just 0.57 inches in length and 0.24 inches in width, and is constructed from a dense Phenolic Paper body that is then coated with a synthetic silicone elastomer. The elastomer is designed to dissipate heat, helping to improve both the reliability and the temperature stability of the component. The FMP100FTE52-7K87 has a rated resistance of 52 K Ohms, ± 0.3%, and can handle up to a maximum power rating of 0.4 Watts at 70 °C ambient temperatures. The component also has an impressive temperature coefficient of resistance of just ± 100 PPM/°C, far higher than the industry standard of ±2000 PPM for other similar through hole resistors, allowing it to remain largely unaffected by fluctuations in temperature or voltage.In terms of applications, the FMP100FTE52-7K87 is well suited to a range of industrial applications, where its excellent stability in extreme temperatures and high resistance accuracy is of particular benefit. This component can be used for voltage and current regulators, to protect circuits from overload or shorting, as well as for precision characterization tasks such as filter networks or oscillator circuits.In order to explain surface-mount resistors in more detail, it is important to understand the underlying working principle of these components.These resistors are designed to transfer an electrical current from a circuit\'s power source to its load. When a given current is applied to the resistor, the electrical energy is converted to heat - the higher the current, the more heat is dissipated as the component\'s temperature rises. This increase in temperature then increases the resistance of the component, causing the current to fall and return to a more stable level.In terms of design, the FMP100FTE52-7K87 is constructed from a ceramic body containing a pair of cylindrical conductors that have a given resistance. The resistance of the component is dependent on the nature of this ceramic material, as well as on the resistivity of the conductor itself. As the current passing through the component is increased, the resistance of the component will increase correspondingly.Ultimately, the FMP100FTE52-7K87 is a through hole resistor that is designed to be used in industrial applications where its incredible stability and accuracy in temperature-sensitive applications are of paramount importance. Its resistance of 52 K Ohms, ± 0.3%, combined with its maximum power rating of 0.4 Watts at 70 °C and its temperature coefficient of resistance of just ± 100 PPM/°C, make this resistor an ideal choice for a range of industrial tasks.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description