FN2200-50-34

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Line Filter Modules are used to reduce the amount of electrical noise generated by a device onto the power lines. The most commonly used type is the FN2200-50-34 Power Line Filter Module. This type of filter module is used to reduce emissions from many different types of loads including electric motors, uninterruptible power supply (UPS) units, medical equipment, and servers.

The FN2200-50-34 Power Line Filter Module utilizes a series of inductors, capacitors and resistors to achieve its noise attenuation. The inductors are typically distributed across the isolation stages to attenuate conducted EMI signals along with resistors to dampen any resonance associated with the inductors. The most common capacitors used are Polypropylene and Metallized Polypropylene capacitors, which provide considerable EMI attenuation in the frequency range of 150 kHz – 30 MHz.

The core component of the Power Line Filter Module is the filter body, which is a sheet-metal enclosure that houses the components of the filter. The body is designed to contain any electromagnetic interference energy disturbing the installation and protect personnel from accidental contact with the live high voltage signals. The body is also designed such that it is easy to install and environmentally sealed.

The filter’s performance is dependent on the quality of the components used as well as the design of the filter body. Good quality components ensure a low parasitic reactance and that the filter will provide consistent noise attenuation under all operating conditions. Additionally, poor quality components can cause signal distortion and degraded performance.

The filter’s body also plays an essential role in providing optimal noise attenuation. Proper design ensures that sufficient air gap is provided between filter components for efficient heat dissipation. Additionally, a well-designed body is necessary to ensure that sufficient air gap is supplied to each inductor to prevent interference from eddy currents.

The FN2200-50-34 Power Line Filter Module is one of the most reliable filter modules available for noise attenuation. It is ideally suited for applications involving high voltage electric motors, UPS units, medical equipment, and servers. Its use of high quality components and efficient filter body provide optimal noise attenuation in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference