FN2200-600-99

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Line Filter Modules are utilized to remove transient and conducted noises that often affect the quality of the current. The FN2200-600-99 is an example of such a device and this article will discuss its application field and working principle.The FN2200-600-99 is an inductive power line filter module, designed for use in both single-phase and three-phase applications. It has an Operating Range of 0 to 70 DCV, and a Rated Current of Ar^. It features a built-in coil that is activated when the filter module is connected, providing additional common-mode noise suppression for enhanced signal integrity.The FN2200-600-99 is designed for the suppression of transient and conducted noises present in the power line, including tones, harmonics, spikes, and other signals. It is able to reduce the peak-to-peak voltage variations present in the power line, as well as reducing ground loops which tend to cause interference. It is also able to reduce or eliminate high frequency (RF) noise that is generated by electric motors, air compressors, and other inductive loads.The working principle of the FN2200-600-99 is based upon the principle of impedance matching. The power line filter module is equipped with inductors and capacitors, which serve to reduce and control the flow of current through the power line. The inductors act as filters, allowing only currents at a certain frequency to pass through, while blocking all other currents. The capacitors are used to ensure that the voltage variations present in the power line are reduced or even eliminated.The combination of an inductor and a capacitor in the FN2200-600-99 is referred to as a resonant circuit. This type of circuit is designed to resonate with the frequency of the incoming power signal, allowing the noise present in the signal to be filtered out. The capacitors also act as decouplers, allowing the filter module to provide better noise suppression at higher frequencies.The FN2200-600-99 is an ideal solution for applications that require transient and conducted noise suppression on the power line. It is able to reduce the peak-to-peak voltage variations, reduce ground loops, and reduce or eliminate high frequency (RF) noise. With its robust construction and high-quality components, the FN2200-600-99 is the perfect choice for any application where power line filtering is required.

The specific data is subject to PDF, and the above content is for reference