FN5045-880-99

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power line filter modules provide effective EMI protection for a variety of applications, and the FN5045-880-99 is a prime example. It is a surface mount, low leakage current power line filter and offers very low leakage current up to 1 nA. It can be used to protect electronic systems against electrical noise due to the wide frequency range of the filter. The low leakage current makes it ideal for high-precision electronic systems that require precise control or measurement.

The FN5045-880-99 has a wide operating temperature range from -40°C to 125°C, which makes it suitable for high-temperature environments. The filter also has good environmental and safety characteristics such as insulation resistance at high temperatures. Additionally, the FN5045-880-99 is RoHS compliant.

The FN5045-880-99 has two types of filter connections - one for a direct connection to a power line and one for an interface with the microcontroller. For the direct connection, it has a 7-pin header with two VCC pins and two ground pins. It also has a 9-pin header for connecting the microcontroller. The microcontroller connection has two VCC pins, two ground pins, and four data pins.

The FN5045-880-99 is designed for a wide range of power line applications such as power supplies for consumer electronics and industrial systems. Additionally, it can be used to filter radio and audio signals, and can also be used to protect systems from EMI interference from other components like motors and relays. The filter has a high impedance of up to 1000 MΩ at 500kHz, allowing it to filter out high-frequency noise.

To ensure maximum efficiency of the filter, it should be properly installed and connected. Before installing and connecting the filter, it is recommended to check the rated power of the device and the required power supply. The connection should be made with low inductance cable to reduce losses. Additionally, the cabling from the filter to the controller should have good screening to reduce the transmission of any unwanted noise generated by the electronic device itself. Depending on the application, the filter may need to be adjusted for different frequencies or gains.

Overall, the FN5045-880-99 is a reliable, low leakage current power line filter module. It can provide high-precision EMI protection in many applications and is ideal for use in high-temperature environments. Its low leakage current makes it suitable for high-precision systems, and its high impedance ensures effective noise filtering. Additionally, its wide operating temperature range and RoHS compliance make it suitable for a variety of applications.

The specific data is subject to PDF, and the above content is for reference