FN7611-63-M6

Current:	63A
Height:	--
Size / Dimension:	1.260" Dia x 4.764" L (32.00mm x 121.00mm)
Package / Case:	Axial - Threaded Terminals
Mounting Type:	Bolt Mount
Voltage - Rated:	1000V (1kV)
Applications:	Data Lines for Mobile Devices
Operating Temperature:	-40°C ~ 100°C
ESD Protection:	No
Values:	L = 186nH, C = 0.015µF
Series:	FN 761X
Resistance - Channel (Ohms):	0.00047
Attenuation Value:	--
Center / Cutoff Frequency:	--
Number of Channels:	1
Technology:	LC (Pi)
Filter Order:	3rd
Type:	Low Pass
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

.

Introduction to EMI/RFI Filters (LC, RC Networks)

EMI/RFI filters (electromagnetic interference/radio frequency interference) are electronic devices designed to reduce the potential effect of unwanted interference on electrical signals. They provide a barrier between two or more circuits and reduce the amount of interference that can be transferred between them. These filters can be categorized under two main types: LC (inductor-capacitor) networks and RC (resistor-capacitor) networks.

FN7611-63-M6 Application Field and Working Principle

The FN7611-63-M6 filter is an LC filter, specifically an inductor-capacitor network, used in the automotive industry for power source smoothing, and impedance matching. The operation of the FN7611-63-M6 filter is fairly straightforward. It consists of two sections – the input side and the output side. The input side of the filter consists of a series of inductors (L1, L2, L3, and L4) and a capacitor (C1). These two components work together to create a low-pass filter, blocking any high frequency noise signals from entering the signal path.The output side of the filter contains two capacitors (C2 and C3) and a single inductor (L5). These components serve to create a high-pass filter, or a section of the filter that only allows high frequency signals to pass through. The output side of the filter is designed to provide a smooth electrical signal, free from any AC noise, to the output terminals.The FN7611-63-M6 is designed to be used in high current applications, where the input and output currents range from 120A to 160A. It is a cost-effective solution and can be easily integrated into an existing system.

Conclusion

Overall, the FN7611-63-M6 filter is an effective LC filter designed for use in the automotive industry. It works by using two sections – one to block low frequency signals and one to provide a smooth output. The filter is designed for high currents and can be easily integrated into an existing system.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description