FOD4208T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Triac, SCR Output

The FOD4208T Optoisolator is a highly reliable device designed for use in industrial applications. It consists of two parts: the first part is a triac optocoupler chip, which isolates the input from the output. The second part is a MOS FET driver which provides a standard electronic control signal for controlling the operation of a triac in the output stage. This isolation ensures that noise and high-voltage interference does not affect the input circuit.

The FOD4208T is a 4-pin device that is constructed using a high-gain phototransistor and a MOSFET transistor. The transistor is used to drive a triac or SCR which is responsible for controlling the output voltage. The optocoupler ensures that the input and output circuits are completely isolated and hence safe from electrical noise.

The FOD4208T is widely used in industrial applications due to its low-cost, small size and high reliability. It is suitable for use in applications such as motor control, LED lighting, and power control. Moreover, the optocoupler is capable of switching on and off AC circuits with a frequency up to 400 kHz. This makes it suitable for high-speed switching applications. As the device is completely isolated, its output is unaffected by any electrical interference from the input circuit.

The FOD4208T is designed to accept a 3V to 20V input voltage and has a power handling capability of up to 200mA (at 5V input voltage). Its output is also capable of handling up to 200mA (at 5V input voltage). It has a maximum operating temperature of +85°C.

The working principle of FOD4208T is simple. An incoming DC signal in the input stage is converted to an AC signal through an optocoupler, which is then fed to a MOS FET transistor. The transistor then controls the current flow in the output stage and allows it to switch on and off at a certain frequency to control the voltage. The output of the device can be used to control AC loads such as motor switches, light bulbs, or any other power device.

In summary, the FOD4208T is a highly reliable optoisolator that is widely used in industrial applications. It is designed to isolate the input and the output stages electrically and is capable of handling up to 200mA of current on both input and output. Its working principle is based on the conversion of an incoming DC signal to an AC signal using an optocoupler, which is then fed to a MOS FET transistor. This makes the FOD4208T suitable applications such as motor control, LED lighting, power control, and high speed switching.

The specific data is subject to PDF, and the above content is for reference