FODM2705R1V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The FODM2705R1V optoisolator is a type of transistor photovoltaic output that is used for safety reasons, to keep the input and output sides electrically isolated from each other, for hazardous area applications. It provides a level of protection from electrical shock, eliminating the need to use optically isolated relays. The device is also immune to transient surges and has a fast switching speed.

The FODM2705R1V is designed to work when coupled with a light emitting diode (LED). Light coming from the LED couples with the isolator’s photovoltaic junction, producing a voltage between the two terminals. An alternating current (AC) signal applied to the LED causes the output voltage to vary. When a given voltage threshold is reached, the output of the device is switched, allowing for a wide range of applications.

Since the FODM2705R1V has a transistor output, it can be used in situations where a load must be connected, for example within a relay setup. The use of photocouplers in a relay circuit is commonplace, as it will ensure that the two systems remain isolated, even when under a large load current. In addition, the use of a transistor output allows for a lower forward current requirement for the LED, making it suitable for use in cost-sensitive projects.

The FODM2705R1V optoisolator can be used in a variety of applications. It can be used to detect fault conditions, and as part of a system to determine if a signal or control device is being disconnected. It is a widely recommended optoisolator for making sure that two systems remain isolated, while also allowing for the passage of a current signal to be transmitted. It can also be used as a signal converter, taking a low-voltage input signal and translating it into a high-voltage output.

The FODM2705R1V optoisolator is rated to work with input voltages of up to 85Vac. When coupled with a LED, it has an output switching voltage of 10 to 30V and a forward current of 50mA max. The device is designed to have a maximum isolation voltage of 1500V. This ensures that any voltage on the input side is kept at a safe level that won’t damage any of the components on either side of the isolator.

The FODM2705R1V optoisolator is a reliable, cost-effective optoisolator solution for projects that require input/output isolation. By using a photovoltaic output, as opposed to an optically isolated relay, the cost of production can be reduced, while still ensuring the same level of protection from electrical shock. The device has a fast switching speed and is immune to transients, while being able to handle large loads.

The specific data is subject to PDF, and the above content is for reference