FODM1007R2

Output Type:	Transistor
Supplier Device Package:	4-SOP
Package / Case:	4-SMD, Gull Wing
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 110°C
Vce Saturation (Max):	300mV
Current - DC Forward (If) (Max):	50mA
Voltage - Forward (Vf) (Typ):	1.4V
Current - Output / Channel:	50mA
Voltage - Output (Max):	70V
Series:	--
Input Type:	DC
Rise / Fall Time (Typ):	5.7µs, 8.5µs
Turn On / Turn Off Time (Typ):	--
Current Transfer Ratio (Max):	160% @ 5mA
Current Transfer Ratio (Min):	80% @ 5mA
Voltage - Isolation:	5000Vrms
Number of Channels:	1
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Transistor, Photovoltaic Output

An optoisolator, also known as an optocoupler or optical isolator, is an electronic component composed of an LED (light-emitting diode) and a photosensitive device such as a photoresistor, photodiode, or phototransistor. These components are used to allow electrical isolation between two circuits while using a signal. One of the circuits, usually referred to as an input circuit, uses the LED to communicate a signal to the other circuit, usually referred to as an output circuit. This allows the two circuits to be completely isolated from each other.A particular type of optoisolator is the FODM1007R2 optoisolator. This device has a 600W electrical rating with a maximum voltage of 5V. It has a TTL compatible phototransistor with a collector current rating of 1mA. This optoisolator is commonly used as an interface between a digital controller and an industrial control device. It is usually used in applications such as motor speed control, lighting control, and process control.The FODM1007R2 works by using optical isolation to protect both the digital controller and the final control device. When the digital controller sends a signal, an LED inside the FODM1007R2 is activated, sending a light signal to a phototransistor inside the optoisolator. The phototransistor then amplifies the light signal and sends an electrical signal to the final control device. This process ensures that no direct electrical connection exists between the digital controller and the final control device.In addition, the FODM1007R2 has a built-in protection circuit. This protection circuit prevents the output of an excessive current, protecting the digital controller and the final control device from damage. The protection circuit also helps to maintain the desired current level, allowing the FODM1007R2 to work safely and reliably in a wide range of applications.The FODM1007R2 optoisolator is a useful device for various applications and offers significant advantages over other optoisolators. Its size and shape make it easy to install and its built-in protection circuit ensures its reliability. Its 600W electrical rating and TTL compatible phototransistor allow it to function well in a wide variety of applications. Finally, its use of optical isolation ensures that both the digital controller and the final control device are protected from electrical damage.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description