FP412

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

FP412 is a type of electrical specialty fuse. It is primarily used to protect circuits and equipment from damage as a result of overload or short circuits. It is a three-pole, panel-mounted fuse that is rated for a maximum interrupting current of 1,000 amps.

FP412 fuses are made from a copper alloy strand conductor and a zinc oxide short-circuit element. The conductor is encased in a cylindrical metal shell that is crimped at the ends to provide greater mechanical strength and support for the fuse in the panel. The cylindrical shell also provides extra protection from the environment from corrosive elements.

The FP412 can be used in many different applications, including residential and commercial power distribution, industrial motor control systems, uninterruptible power supplies, industrial communications and automation, and power electronics. In each of these applications, the fuse acts as a safety device to protect circuits and equipment from overcurrent or short-circuit conditions.

The working principle of an FP412 is simple. When an overcurrent or short-circuit occurs in a circuit, the fuse absorbs heat from the increased current, causing the zinc oxide element to expand and create a metal bridge between the two poles of the fuse. This bridge interrupts the current flow through the circuit, effectively cutting off power to the affected device.

The zinc oxide element is designed to be able to handle short-circuit currents that exceed its rated value. This helps to prevent catastrophic damages that could be caused by large short-circuit currents. The element also acts as a resistor in the circuit, allowing enough current to pass through to power the equipment but not enough to cause damage.

FP412 fuses are a reliable and cost-effective solution for protecting many different types of circuits and equipment. They are easy to install and offer a reliable method for protecting circuits and equipment from both overload and short-circuit conditions.

The specific data is subject to PDF, and the above content is for reference