FR2J-LTP Discrete Semiconductor Products |
|
Allicdata Part #: | FR2J-LTPMSTR-ND |
Manufacturer Part#: |
FR2J-LTP |
Price: | $ 0.06 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Micro Commercial Co |
Short Description: | 2A,600V,FAST RECOVERY RECTIFIERS |
More Detail: | Diode Standard 600V 2A Surface Mount DO-214AA (SMB... |
DataSheet: | FR2J-LTP Datasheet/PDF |
Quantity: | 3000 |
3000 +: | $ 0.05715 |
6000 +: | $ 0.05398 |
15000 +: | $ 0.04922 |
30000 +: | $ 0.04604 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Diode Type: | Standard |
Voltage - DC Reverse (Vr) (Max): | 600V |
Current - Average Rectified (Io): | 2A |
Voltage - Forward (Vf) (Max) @ If: | 1.3V @ 2A |
Speed: | Fast Recovery = 200mA (Io) |
Reverse Recovery Time (trr): | 250ns |
Current - Reverse Leakage @ Vr: | 5µA @ 600V |
Capacitance @ Vr, F: | 50pF @ 4V, 1MHz |
Mounting Type: | Surface Mount |
Package / Case: | DO-214AA, SMB |
Supplier Device Package: | DO-214AA (SMB) |
Operating Temperature - Junction: | -50°C ~ 150°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Diodes - Rectifiers - Single
A single diode rectifier refers to a circuit that uses a single diode to convert an alternating current (AC) supply into a direct current (DC) supply. There exists a variety of such devices such as the FR2J-LTP, which stands for frank rectifier two junction–limited power supply. This application field and working principle are discussed in further detail below.
FR2J-LTP Application Field
The FR2J-LTP is highly-efficient direct current (DC) power supply. It can be used in a variety of applications ranging from consumer electronics, audio, automotive electronics, industrial, military, and aerospace applications. In consumer electronics, the FR2J-LTP is used to produce highly efficient DC power supplies for items like televisions, computers and audio. Due to its efficient design, the FR2J-LT provides higher level of protection and safety measures more than conventional linear biasing methods.
FR2J-LTP Working Principle
The FR2J-LTP works by converting an alternating current (AC) supply into a direct current (DC) supply. This is done by using a circuit known as a bridge rectifier. The bridge rectifier contains four diodes arranged in a bridge configuration. When an AC supply is applied to the bridge circuit, the four diodes switch on and off at different times in order to allow only the positive or negative part of the AC current to flow. This is then followed by a filtering stage with a capacitor, which leads to the production of smooth DC output.
The FR2J-LTP then goes one step further and uses a two-junction device to provide power limiting to the downstream side. This helps to ensure that the power supply does not exceed the rated amount. Moreover, it can also provide a power-on reset circuit to turn itself on and off automatically in order to run in low-power mode, allowing for improved power efficiency.
Conclusion
The FR2J-LTP is an efficient bridge rectifier for single diode rectification. It is suitable for a wide variety of applications, ranging from consumer electronics to audio, automotive, industrial, military, and aerospace applications. In addition, the FR2J-LTP also provides power-limiting and power-on reset circuitry, allowing for higher level of safety, efficiency, and protection than other rectification methods.
The specific data is subject to PDF, and the above content is for reference
Diodes - General Purpose, Power, Switchi...
DIODE SCHOTTKY 40V 500MA SC76Diode Schot...
DIODE GEN PURPOSE DO-204ALDiode
DIODE GEN PURP 400V 1A DO41Diode Standar...
DIODE SCHOTTKY 20V 1A DIE 1=400Diode Sch...
DIODE GEN PURP 400V 500MA D5ADiode Stand...