FR302TA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are electrical components used to regulate the flow of electricity. They are commonly found in a variety of electronics, including switches, rectifiers, and transistors. The FR302TA is a single rectifier diode that is commonly used in circuits that require fast switching capabilities.

The FR302TA is a silicon-based diode that is constructed using a very thin layer of silicon material. It has a positive and negative terminal, with the negative terminal being the cathode. On the positive side, the anode will be connected to the circuit’s power supply. The FR302TA has a low forward voltage drop, meaning that it can provide better current regulation than other diodes. In addition, it can operate at temperatures as high as 175°C, making it suitable for applications that require high temperature operation.

The FR302TA has a variety of applications, but it is primarily used in switching and rectifying circuits. In these circuits, the diode acts as a one-way valve, allowing power to flow only in the desired direction. The diode also offers protection against induced and transients found in the power supply.

When the FR302TA is connected in a circuit, it operates as a switch and opens when a certain voltage is applied to its terminals. When the voltage is removed, the diode closes and the power flow is blocked. The rectifying capabilities of this diode allow it to create a bridge with rectified alternating current, allowing higher power levels.

The working principle of the FR302TA is very simple. When the forward bias voltage is applied, the diode is switched on and allows current to flow through the circuit, while a reverse bias voltage switches the diode off, preventing current from flowing. The forward and reverse bias voltages depend on the characteristics of the diode, such as its rated breakdown voltage. The FR302TA has a very low rated maximum reverse voltage (1.3V), making it suitable for applications that require low voltage power supplies.

The FR302TA is a single rectifier diode that is primarily used in switching and rectifying circuits. It is constructed using a thin layer of silicon material, with a low forward voltage drop and high temperature capability, making it ideal for a variety of applications. Its rectifying capabilities enable it to create a bridge with rectified alternating current. Its working principle is based on the forward and reverse bias voltages, which are dependent on the diode’s characteristics.

The specific data is subject to PDF, and the above content is for reference