Allicdata Part #: | FR3DTASMC-ND |
Manufacturer Part#: |
FR3DTA |
Price: | $ 0.07 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | SMC Diode Solutions |
Short Description: | DIODE GEN PURP 200V 3A SMC |
More Detail: | Diode Standard 200V 3A Surface Mount SMC (DO-214AB... |
DataSheet: | FR3DTA Datasheet/PDF |
Quantity: | 1000 |
48000 +: | $ 0.06001 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Diode Type: | Standard |
Voltage - DC Reverse (Vr) (Max): | 200V |
Current - Average Rectified (Io): | 3A |
Voltage - Forward (Vf) (Max) @ If: | 1.3V @ 3A |
Speed: | Fast Recovery = 200mA (Io) |
Reverse Recovery Time (trr): | 150ns |
Current - Reverse Leakage @ Vr: | 5µA @ 200V |
Capacitance @ Vr, F: | 60pF @ 4V, 1MHz |
Mounting Type: | Surface Mount |
Package / Case: | DO-214AB, SMC |
Supplier Device Package: | SMC (DO-214AB) |
Operating Temperature - Junction: | -65°C ~ 150°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
FR3DTA is an electronic device that is used to convert alternating current (AC) into direct current (DC) for various applications. These devices are commonly referred to as rectifiers and typically come in two varieties, single and three-phase. The FR3DTA is an example of a single-phase, full-wave rectifier circuit. This type of circuit works by using diodes to allow current to only pass in one direction, thus creating a steady direct current.
The FR3DTA is composed of four diodes arranged in a bridge configuration. This bridge rectifier circuit works by allowing current to flow in one direction through two of the diodes, while the other two diodes prevent it from flowing in the opposite direction. Each of the diodes is connected to a different AC voltage output. The A, B, and C connections of the rectifier are the positive and negative outputs of the AC power source, with the D connection being the common point of the circuit and the output of the DC power.
The FR3DTA is an important electronic device in many industries, such as renewable energy applications, air conditioner systems, and power converters. In terms of renewable energy applications, the rectifier is used to convert the AC output of a wind turbine into DC power that can be stored in batteries. Similarly, it can be used to convert the AC output of solar cells into DC power. In air conditioner systems, the FR3DTA is used to convert the power from the AC power source into DC power needed by the compressor to move the refrigerant.
In power converters, the FR3DTA is used to convert the varying AC power source into a DC power output that can be regulated. The rectifier is also used in power supplies for electronic equipment such as computers, TVs, and audio systems. It provides a safe, reliable DC voltage for the operation of these electrical components.
The FR3DTA is a very important and widely used electronic device because of its simplicity and efficiency. Its use helps to ensure that the power output is stable and reliable and can be used in many different applications, both commercial and residential applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
FR3DTA | SMC Diode So... | 0.07 $ | 1000 | DIODE GEN PURP 200V 3A SM... |
Diodes - General Purpose, Power, Switchi...
DIODE SCHOTTKY 40V 500MA SC76Diode Schot...
DIODE GEN PURPOSE DO-204ALDiode
DIODE GEN PURP 400V 1A DO41Diode Standar...
DIODE SCHOTTKY 20V 1A DIE 1=400Diode Sch...
DIODE GEN PURP 400V 500MA D5ADiode Stand...