FR70JR02

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are the most common elements found in electrical circuits; they are used to convert the alternating current (AC) into the direct current (DC). The most common type of diode is the single rectifier diode, which is used in applications such as AC to DC power conversion and voltage clamping. The FR70JR02 is a single rectifier diode which has a wide range of applications and works on the principle of rectification.

The FR70JR02 is a Single Rectifier Diode (SRD) made from gallium arsenide (GaAs) and is capable of withstanding high reverse surge current of up to 60 Amps. It has a forward voltage drop of 0.9 volts and a forward current rating of 6 Amps. The FR70JR02 is capable of switching rapidly with an average forward recovery time of 200nsec and a peak reverse current of 45 milliamps. The diode is SOT-143 packaged and is conveniently used in high frequency switching with its low junction capacitance.

The FR70JR02 performs its function of rectification by allowing electrical current to flow through it in only one direction. In electronics and electrical engineering, rectification is a type of conversion process by which alternating current (AC) is changed into direct current (DC). This is done by taking the average of each half-cycle of AC and turning it into a positive voltage of the same magnitude. This process, known as full-wave rectification, involves the use of a bridge-rectifier which comprises of four diodes connected in a bridge configuration. When applying a voltage across the two ends of the rectifier, the diodes are turned on and off according to the alternating signal.

The FR 70JR02 also finds applications in high frequency power conversion and voltage clamping. Voltage clamping circuits monitor the voltage level of a signal and help protect it from experiencing high voltages which could cause it to be damaged or destroyed. This diode can also be used in noise suppression to eliminate the electric interference caused by a high-frequency AC signal.

In summary, the FR 70JR02 is a single rectifier diode made from GaAs which has a range of applications in many kinds of power electronics. It uses rectification to convert an alternating current signal into a direct current signal, and can also be used in noise suppression, high frequency switching, and voltage clamping. The diode can handle a high reverse surge current rating and a low junction capacitance which makes it an ideal choice for many power electronics applications.

The specific data is subject to PDF, and the above content is for reference