FT24C512A-USG-B

Series:	--
Packaging:	Tube
Part Status:	Active
Memory Type:	Non-Volatile
Memory Format:	EEPROM
Technology:	EEPROM
Memory Size:	512Kb (64K x 8)
Clock Frequency:	1MHz
Write Cycle Time - Word, Page:	5ms
Access Time:	550ns
Memory Interface:	I²C
Voltage - Supply:	1.8 V ~ 5.5 V
Operating Temperature:	-40°C ~ 85°C (TA)
Mounting Type:	Surface Mount
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	8-SOP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

FT24C512A-USG-B Application Field and Working Principle

Introduction of Memory

Memory refers to a data storage device, which is a device used to store data or programs. With it, the content of data processing can be retained for a long time even if the power supply is cut off. Common memories are mainly divided into two categories: volatile memories and non-volatile memories.Volatile memories refer to memories that lose data when the power is turned off. For example, the memory used in ordinary computers is DRAM (dynamic random access memory). DRAM is fast in operating speed and large in storage capacity, but the data should be constantly refreshed to retain them.Non-volatile memories refer to memories that do not need to be powered on to maintain data. NOR FLASH (read-only memory) and NAND FLASH (NAND flash memory) are the two most common non-volatile memories. They have good energy saving attributes without the need for periodic timing or refreshing operations.

Introduction of FT24C512A-USG-B

FT24C512A-USG-B is a non-volatile flash memory from STMicroelectronics. It belongs to the I2C (Inter-Integrated Circuit) interface EEPROM (Electrically-Erasable Programmable Read-Only Memory). It has a storage capacity of up to 512K bytes and is available in varieties of surface mount packages.Compared to its predecessor, FT24C512A-USG-B offers improved performance in terms of power saving, read/write speeds and program/erase cycles. It also features advanced security features to protect stored data, such as over-voltage protection and write-protect options. Moreover, its light weight and flexibility makes it an attractive choice for a broad range of applications.

FT24C512A-USG-B Applications

FT24C512A-USG-B is widely used in many applications, such as embedded systems, consumer electronics, automotive electronics, and industrial systems.For embedded systems, FT24C512A-USG-B is used to store information often associated with the system. An example of this would be a set of welcome messages upon system start-up and parameter settings as well as program or product code.For consumer electronics, FT24C512A-USG-B is often used to store personalization settings and track available resources. It can also be used to store small amounts of product information and download software updates.For automotive electronics, FT24C512A-USG-B is used in keyless entry systems, hybrid electric-powered vehicles, on-board security systems and airbag control units. It can be used to store engine control settings, steering system settings and accessory memory settings.For industrial systems, FT24C512A-USG-B is used to improve equipment performance, as well as track and monitor data associated with the operation of the equipment. It can also be used to store and update device calibrations or parameters over the life of the system.

FT24C512A-USG-B Working Principle

FT24C512A-USG-B is a non-volatile memory which means that it does not need to be powered on to maintain data. The working principle of FT24C512A-USG-B is very simple and straightforward. Its operation is based on the I2C (Inter-Integrated Circuit) interface standard. To write or read data, first the start bit and address byte is sent, followed by a read/write bit to indicate whether the current operation is a read or a write. Then, a command byte (for write operations, indicating the location where the data is to be written to, or for read operations indicating the location to read from) is transmitted. For write operations, the data to be written is then sent to the device. The device then stores the data in the indicated location. For read operations, the device sends the data located in the indicated location as a response. Regardless of the operation, a “stop” bit is again sent at the end of the transaction. This completes the transaction.

Conclusion

In conclusion, FT24C512A-USG-B is an efficient and reliable non-volatile I2C flash memory from STMicroelectronics. It is widely used in a variety of applications, such as embedded systems, consumer electronics, automotive electronics and industrial systems. Its working principle is straight-forward and based on the I2C interface standard.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description