FT4LC900FS01

Series:	*
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

FT4LC900FS01 is a member of the FT4LC series of single channel, low voltage, ultra-low-power isolated current sensors. It is designed to provide a low voltage proportional current signal that is immune to ground shifts caused by the conductor being monitored. The FT4LC900FS01 can operate in currents up to 100 amps and generate an analog output voltage proportional to the magnitude of the current. It also features an external or internal current calibration for improved accuracy and better control of signal output.The FT4LC900FS01 is comprised of a handful of components including an integrated circuit (IC), a ferrite material, and a few external heat sinks. The IC used in the FT4LC900FS01 is an exclusive low-voltage link switch IC that operates with a supply voltage between 3.3V and 5V. The circuit\'s integrated ferrite material provides a high bandwidth and low-noise link between the monitors input and output.The working principle of the FT4LC900FS01 consists of three main principles. The first principle is the Link Principle. This principle works by connecting the current signal to the output without any direct electrical connection to the sensed conductor. This is what enables the FT4LC900FS01 to eliminate ground shift noise while measuring high current levels. The second principle is the Saturation Principle. This principle works by using the IC’s internal switching mechanism to saturate the individual transistors, thus limiting the voltage output by the FT4LC900FS01 to a predetermined level. The third principle is the Zero Principle. This principle works by providing an offset voltage across the device to allow for a larger range of current to be measured.The FT4LC900FS01 has a wide range of potential applications, including use in electric motor control systems, lighting systems, automotive systems, HVAC systems, and more. The FT4LC900FS01 is designed to provide an accurate and low-cost solution for measuring very high current levels in these types of applications. It can provide reliable current monitoring where DC current measurement is critical, and is ideal for current level protection in high voltage or low voltage applications. The FT4LC900FS01 is also suitable for use in medical applications and can be used to monitor pumps, motors, compressors, and other equipment in medical environments. Furthermore, the FT4LC900FS01 can be used in battery management systems where it can monitor charge and discharge currents in lithium-ion batteries. In addition to the applications mentioned, the FT4LC900FS01 can be used in other industries such as alternative energy and smart grid applications. It is even suitable for use in refineries, chemical plants, and machine tool environments where it can be used to measure current and prevent damage or over-currents. Finally, the FT4LC900FS01 is designed to provide reliable protection against short circuits, and therefore, it is often installed as part of a larger system to protect from over-currents. The FT4LC900FS01 can be used in both commercial and residential applications for monitoring and providing a visual indication when a potential short circuit or over-current is detected.Overall, the FT4LC900FS01 is a reliable current monitoring device designed to provide accurate current readings in a variety of applications. It is easy to install and can be used in household, industrial, and commercial settings alike. Its low voltage design and high accuracy are key advantages, making it an ideal choice for current sensing and protection.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description