FYP1010DNTU

Series:	--
Packaging:	Tube
Part Status:	Active
Diode Configuration:	1 Pair Common Cathode
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	100V
Current - Average Rectified (Io) (per Diode):	10A
Voltage - Forward (Vf) (Max) @ If:	950mV @ 10A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	1mA @ 100V
Operating Temperature - Junction:	-65°C ~ 150°C
Mounting Type:	Through Hole
Package / Case:	TO-220-3
Supplier Device Package:	TO-220-3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Diodes, rectifiers, and arrays are components that are often used in electrical and electronic circuits to convert AC signals into DC signals. This article is going to discuss the FYP1010DNTU application field and working principle, particularly focusing on its uses as a part of a diode, rectifier, or array.

FYP1010DNTU Application Field

The FYP1010DNTU is a type of diode that is used in rectifier circuits and arrays. It is mainly used in switching, low voltage voltage regulator, rectifier, converter, and protection circuits. The device is typically used in applications where currents and voltages levels are low, and can be found in things such as computers, cell phones, and medical equipment.

Working Principle

The FYP1010DNTU device is basically an electronic component that is made up of two terminals, which is called an anode and a cathode. The two terminals are connected to form a diode, which can be used for regulating the flow of electricity in a circuit. When a voltage is applied to the two terminals, it will either allow the current to flow from the anode to the cathode, or from the cathode to the anode. Generally speaking, the anode is connected to the positive voltage, while the cathode is connected to the negative voltage.When the terminal of the FYP1010DNTU diode is connected to a positive voltage, the diode will be in the forward-biasing mode. This means that it will allow the current to flow from the anode to the cathode, which is called the forward-biased current. When the terminal of theFYP1010DNTU diode is connected to a negative voltage, the diode will be in the reverse-biasing mode. This means that it will allow the current to flow from the cathode to the anode, which is called the reverse-biased current.The FYP1010DNTU diode can also be used in rectifier and array circuits in order to convert alternating current (AC) signals into direct current (DC) signals. In rectifier circuits, the FYP1010DNTU diode will be connected in pairs with other diodes, such as Zener diodes, in order to form a bridge rectifier circuit. The bridge rectifier will allow the AC signal to be converted into a DC signal by alternating the flow of current through it.

Conclusion

In conclusion, the FYP1010DNTU diode is a commonly used component of diode, rectifier, and array circuits. It can be used in these circuits to regulate the flow of electricity or to convert AC signals into DC signals. The FYP1010DNTU is especially useful in applications where low currents and voltages levels are present, such as in computers, cell phones, and medical equipment.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description