G3FD-102SN-VD-AC200220

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays (SSR) are becoming increasingly popular with electronic circuit designers due to their efficiency, reliability, and robustness. The G3FD-102SN-VD-AC200220 is a popular choice due to its low power, high isolation, and wide operating temperature range. In this article, we will discuss the application fields and working principles of the G3FD-102SN-VD-AC200220.

The G3FD-102SN-VD-AC200220 is a solid state relay typically used in switch mode power supply (SMPS) applications. It is capable of switching up to 10 A of DC power and its maximum switching capacity is rated up to 300 VDC. This makes it suitable for a range of applications such as light dimmers, home appliances, cut-off/slow start circuits, limit switching/feedback circuits, motor control, etc. In addition, its wide operating temperature range from -55°C to +130°C makes it suitable for applications in harsh environments.

The G3FD-102SN-VD-AC200220 is typically driven by a solid-state switch such as a transistor, MOSFET, or triac. A voltage signal is applied to the control input and this turns the output on or off. The output voltage is switched on and off in response to the control input voltage. The output voltage is kept on or off to maintain a set position of the output load such as a motor. The physical contacts remain in the same state until the control voltage changes. This makes the SSR ideal for applications such as traffic lights, elevators, and temperature controllers.

In terms of its working principle, the G3FD-102SN-VD-AC200220 utilizes a low-power, low-voltage semiconductor switch. It has an LED emitter and photodiode detector, which detect the control voltage signal and actuates or deactivates the output switch accordingly. When the control voltage is LOW, the LED emitter is OFF and the photodiode does not receive any light. This causes the switch to remain in the OFF state. When the control voltage is HIGH, the LED emitter is turned ON and the photodiode detects the light. This causes the switch to actuate and the output voltage is switched on. The switch then remains in the ON state until the control voltage changes.

In summary, the G3FD-102SN-VD-AC200220 solid state relay is a suitable device for a variety of applications where its low power, high isolation, and wide operating temperature range are advantageous. They are found in many switch mode power supply applications as well as for traffic lights, elevators, and temperature controllers. Its working principle relies on a low-power, low-voltage semiconductor switch with LED emitter and photodiode detection to actuate and deactivate the switch accordingly.

The specific data is subject to PDF, and the above content is for reference