G3NE-220TL-2-US DC12

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The G3NE-220TL-2-US DC12 is a solid state relay ideal for applications where an on/off relay or appropriate electronic switching is required. It can be used for simple on/off loads, switching lights, motor speeds, and even switching high power current flows. The device works by controlling current and voltage in order to switch on/off different loads. This relay uses an SSR (Solid-State-Relays) which is an electronic device that replaces mechanical relays. The relay is designed provide reliable power control in a cost-effective manner.

Application Field

The applications fields that the G3NE-220TL-2-US DC12 can be used for includes: motor control, lamps and general lighting applications, refrigerated cabinets and vending machines, and HVAC (Heating, ventilation, and air conditioning) systems. It can also be used for automotive applications such as reversing lights, trunk lights, dashboard lights and starter circuits. Further, it can also be used for high power applications such as driving water heaters, LED lights, pumps, motors, and fans.

Working Principle

The G3NE-220TL-2-US DC12 Solid State Relay uses thyristors and Triacs to control the power flow. The relay transforms the input signal from an open reference source (in other words no power) into an output voltage and current. When the relay is energized, it closes the thyristor Triac allowing a current to flow between the two terminals. When the relay is de-energized, the Triac will open automatically and block the power flow from the terminals.

The thyristor contains three layers. The gate is the part that is energized and causes the thyristor to turn on or off. The anode is the positive terminal and the cathode is the negative terminal. When the gate is energized, the thyristor conducts current from the anode to the cathode. To turn off the thyristor, the gate voltage must be removed or brought to a lower voltage level.

The Triac offers two benefits: it can control voltages of either polarity and can control switching of both resistance and inductive loads. Generally the Triac is used to switch heavy currents in electrical circuits, whereas the thyristor is used to switch heavier currents in industrial type of circuits. The function of the thyristor in the G3NE-220TL-2-US DC12 relay is to act as a bridge between the control circuit and the load.

Pros and Cons

The G3NE-220TL-2-US DC12 relay has a few advantages including a long life of over 100,000 cycles, easy setup and low voltage operation, and efficient switching of resistive and inductive loads. The relay can also control high power currents up to 220 Amp. The disadvantages include the slight expense compared to mechanical relays, and the lack of isolation between the control and load. Finally, the power losses due to the Triac\'s low on-state resistance will increase power consumption and can potentially heat the relay.

Conclusion

The G3NE-220TL-2-US DC12 Solid State Relay is an excellent choice for many applications. It is cost-effective and easy to set up since there is no mechanical contact. Its efficient design helps to reduce power losses, and its long life of over 100,000 cycles ensures its reliability. The relay can provide both high and low power control making it suitable for a variety of applications. However, its reliability and performance come at a slight cost, and it lacks isolation between the control and the load.

The specific data is subject to PDF, and the above content is for reference