G3PE-215B-3N DC12-24

Contactors (Solid State): G3PE-215B-3N DC12-24 application field and working principle

The contactors (Solid State) is a kind of switching component which can control and protect a large number of circuits with small electric power signals, powerful switching capacity and long service life. The most commonly used type of contactors (Solid State) is G3PE-215B-3N DC12-24 type.

The application field of G3PE-215B-3N DC12-24 contactor (Solid State) mainly covers AC electrical circuits. It is suitable for commonly used AC circuits with control requiremetns ranging form 0.1 to 440 volts, 10 to 90 amperes. It is also an ideal electrical component for various control and protection equipments, including heating and lighting systems in buildings.

The G3PE-215B-3N DC12-24 contactor (Solid State) makes use of the semiconductor devices mainly as the switch, and the mechanical part mainly for the contact. It combines the merits of the two and offers superior features compared to the traditional types of contactors.

The working principle of G3PE-215B-3N DC12-24 contactor (Solid State) is very simple. The controlling part, such as buttons or relays, are used to provide the low voltage signals. When the signal is sent, the semiconductor bridge of the contactor will be turned on or off, thus influencing the flow and direction of the electric current. The mechanical part is mainly responsible for making contact and breaking the contact. This is because the electric current will be conducted when the contact is on, and will not be conducted when the contact is off. The contactor then provides a better protection to the electric equipment or systems under its control.

G3PE-215B-3N DC12-24 contactor (Solid State) provides a few additional features not available in other types of contactors. It can open and close quicky and efficiently due to its low resistance characteristics, thus providing better protection to the electric circuits. The contactors also have a good anti-interference capacity, which ensures that there are no unnecessary currents in the control circuit.

In addition to the protection and control mentioned earlier, the G3PE-215B-3N DC12-24 contactor (Solid State) can also be used for various other purposes. It can be used to control the air conditioners, lightings, motors or pumps. It is also capable of protecting the electrical systems from overcurrent or voltage surge.

Therefore, G3PE-215B-3N DC12-24 contactor (Solid State) is a very useful and efficient type of contactor. It can be widely applied for various electric circuits and equipments, offering better protection to them. In addition, the contactor can also be used for simple control tasks, such as switching on and off the lights and air conditioners. Thus, it is an important part of any modern electric system, and its use will continue to grow in the future.