G3PE-225B-3 DC12-24

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Contactors (Solid State) provide a wide range of switching applications in industrial systems and are used for connecting high-voltage loads to the main power supply. The G3PE-225B-3 DC12-24 is a contactor which provides high performance switching for up to 24 volts DC.

The G3PE-225B-3 DC12-24 contactor is an electromechanical device which uses a series of solid-state relay (SSR) switching contacts to switch current and voltage in a circuit. The contactor is designed to activate when a predetermined voltage is applied to its terminals, and will deactivate when the voltage is no longer present. This type of contactor is particularly useful for switching high-voltage loads in industrial and commercial applications.

The G3PE-225B-3 DC12-24 contactor is constructed with a series of metal contacts which are designed to switch currents or voltages in a closed circuit. The contacts are separated by a dielectric material, which provides insulation and a barrier between them. The contacts are connected to a signal source, such as an isolator, and an actuator. The actuator is then used to open and close the contacts, depending on the voltage applied.

The contactor also incorporates a built-in safety feature which prevents the contactor from overloading when the load is too high. This feature is known as \'load switch\'. The load switch ensures that the contactor will remain closed until the voltage drops below a certain point, at which time it will open and disconnect the load from the power source.

When the contacts are opened, the current flow in the circuit will be interrupted, and the load will be disconnected from the power source. This will cause the contactor to trip and the load will be disconnected from the power source and the contacts will be reset. This resetting action will restore the contactor to its original working state and it will be ready to be operated again.

In addition to this, G3PE-225B-3 DC12-24 contactors also feature a number of other features, such as a temperature indicator, a surge protection device and an isolator. The temperature indicator will alert the user if the contactor is running too hot, while the surge protection device will protect the contactor from over-voltage or over-current. The isolator will also ensure that the contacts are not exposed to external electric interference.

The G3PE-225B-3 DC12-24 contactor provides a reliable and cost-effective switching solution for industrial and commercial applications. Thanks to its robust design and built-in safety features, it is well suited for a variety of tasks, including controlling motors and lighting systems, as well as providing power in areas where there is no mains connection available.

The specific data is subject to PDF, and the above content is for reference