G3SBA20-M3/45

Series:	--
Packaging:	Tube
Part Status:	Active
Diode Type:	Single Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	200V
Current - Average Rectified (Io):	2.3A
Voltage - Forward (Vf) (Max) @ If:	1V @ 2A
Current - Reverse Leakage @ Vr:	5µA @ 200V
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	4-SIP, GBU
Supplier Device Package:	GBU

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Bridge rectifiers are commonly used for converting alternating current (AC) power to direct current (DC). Diodes are the basic component used in a bridge rectifier. Bridge rectifiers are most commonly used for power supply conversions from AC to DC and for electronic motor speed control. A bridge rectifier circuit often includes capacitors and transformers that help regulate the output.

G3SBA20-M3/45 Application Field and Working Principle

The G3SBA20-M3/45 is a full-wave bridge rectifier used in many of today’s electronics applications. It is designed to convert AC power to DC power, with a maximum input voltage rating of 45V. The device features a wide current range, enabling its application in many different types of AC to DC conversions. The device is highly efficient, with a low forward voltage drop.The G3SBA20-M3/45 consists of four diodes that are connected in a bridge configuration. When AC power is applied to the bridge rectifier, current first flows through two of the four diodes in the bridge rectifier. These two diodes are referred to as the upper diodes. This current then exits the bridge rectifier and is supplied to the output. When the polarity of the AC power is reversed, the other two diodes, called the lower diodes, allow current to flow into the bridge rectifier. This current also exits the bridge rectifier, providing the second part of the full-wave voltage waveform to the output.The two upper diodes of the G3SBA20-M3/45 bridge rectifier conduct during the positive half-cycle of the AC power input. The two lower diodes of the device then conduct during the negative half-cycle of the AC power input. The bridge rectifier then converts the AC power to DC power with minimal distortion.

Conclusion

The G3SBA20-M3/45 is a full-wave bridge rectifier designed to convert AC power to DC power. The device features a wide current range, a low forward voltage drop, and is highly efficient. The G3SBA20-M3/45 consists of four diodes connected in a bridge configuration and works by having the two upper diodes conduct during the positive half-cycle of the AC power input and the two lower diodes conduct during the negative half-cycle of the AC power input. This allows the G3SBA20-M3/45 to convert AC power to DC power with minimal distortion.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description