G5LE-1-ASI DC5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Relays are electrical switches used to control power to a device. The G5LE-1-ASI DC5 power relay is used to switch larger loads and is capable of switching over 2 Amps. G5LE-1-ASIs provide a higher level of control over other types of relays and can be used in a variety of applications.

The G5LE-1-ASI DC5 is a solid state relay with a switching speed of 10 mS. It has a rated input current of 4-5A and a maximum output current of 8A. The G5LE-1-ASI DC5 has a built-in AC Operated Switch and is available in several configurations. It is commonly used for switching AC and DC load circuits.

The most common application for the G5LE-1-ASI DC5 relay is in motor starting applications. It is used to switch the power supplied to an electric motor. When the relay is energized, the motor is started and when the relay is de-energized, the motor stops. This type of relay is also used in phase control applications where loads are to be switched between different phases.

The G5LE-1-ASI DC5 also has a range of safety features that make it well suited for use in industrial and commercial applications. It has an overvoltage protection feature which limits the amount of voltage the relay is exposed to. It also has an overcurrent protection feature which limits the amount of current the relay can draw from the circuit.

To ensure a reliable and safe operation of the G5LE-1-ASI DC5, it should be correctly installed. The relay must be protected from dirt, dust, moisture, vibration and heat. Proper insulation is also important. The relay should be mounted on a heat sink, and the wiring should be correctly insulated.

The working principle of the G5LE-1-ASI DC5 is relatively simple. When an AC input voltage is applied, the relay will start and remain on until the input voltage is removed. When the input voltage is removed, the relay will switch off and the load circuit will be disconnected. The same principle can be applied to DC inputs as well.

The G5LE-1-ASI DC5 is a reliable and cost-effective power control solution. Its high switching speed and safety features make it ideal for a wide range of applications. It can be used for switching AC and DC loads, motor starting, and phase control applications. With correct installation and maintenance, these can be used in a variety of industrial applications.

The specific data is subject to PDF, and the above content is for reference