GBLA10 D2G

Series:	--
Packaging:	Tube
Part Status:	Active
Diode Type:	Single Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	1kV
Current - Average Rectified (Io):	4A
Voltage - Forward (Vf) (Max) @ If:	1V @ 4A
Current - Reverse Leakage @ Vr:	5µA @ 1000V
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	4-SIP, GBL
Supplier Device Package:	GBL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Diodes, also known as rectifiers, are devices which allow current to pass through them in only one direction. Bridge rectifiers are a type of diode, which consist of two or more diodes arranged to form a \'bridge\' which converts alternating currents (AC) into direct current (DC) by allowing only one section of the alternating waveform to pass through the rectifier at a time. A type of bridge rectifier is the four element bridge rectifier, or GBLA10 D2G series, which is used for high current power supply applications. This article will discuss the application fields and working principle of the GBLA10 D2G bridge rectifier.

Application Fields

The GBLA10 D2G series of bridge rectifiers are designed for high power applications and are suitable for use in both industrial and consumer electronics. These rectifiers can be used to convert AC to DC in industrial equipment, including motorised appliances, motor drives, power supplies, lighting systems and other devices which require high power levels, such as ovens and boilers.In consumer electronics, GBLA10 D2G bridge rectifiers can be used to provide power to audio, video and computer systems. They are also suitable for use in RF applications, such as cellular base stations, satellite and TV transmission systems, as well as in gas and water heaters.

Working Principle

GBLA10 D2G bridge rectifiers are designed to operate in a wide range of input AC voltages and frequency, allowing for a higher power output and efficient rectification of electricity. The rectifier consists of four diodes arranged to form a bridge circuit which allows current to flow from the AC supply to the output only in one direction.When current passes through the rectifier, it is split into two DC legs. The output is then taken from the sum of these two legs. The working of a GBLA10 D2G bridge rectifier can be illustrated with the following diagram:When the AC voltage is applied to the input of the rectifier, the diodes in the bridge form two separate paths, referred to as the positive and negative legs. Each leg allows current to flow in only one direction, and so the alternating voltage is converted into two DC legs which are in phase opposition to each other. The output taken from the bridge rectifier is the sum of the two DC legs, and so the sum is equal to the input voltage for a given AC voltage and frequency. This rectifier also produces an output voltage which is much more stable than that of a single diode rectifier, which would produce an output voltage which fluctuates significantly with input voltage and frequency.

Conclusion

In conclusion, the GBLA10 D2G is a four element bridge rectifier which is designed to convert AC to DC in high power applications. It can be used in industrial and consumer applications, such as motorised appliances, RF systems and audio video systems. The rectifier consists of four diodes arranged in a bridge circuit, allowing for current to be converted into two DC legs which are in phase opposition to each other. The output taken from the bridge rectifier is the sum of these two DC legs, and is equal to the input voltage for a given AC voltage and frequency.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description