GBPC5010 T0G

Series:	--
Packaging:	Tray
Part Status:	Active
Diode Type:	Single Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	1kV
Current - Average Rectified (Io):	50A
Voltage - Forward (Vf) (Max) @ If:	1.1V @ 25A
Current - Reverse Leakage @ Vr:	10µA @ 1000V
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	QC Terminal
Package / Case:	4-Square, GBPC40
Supplier Device Package:	GBPC40

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to GBPC5010 T0G

GBPC5010 T0G bridge rectifiers are a type of diode used in electronics to convert alternating current (AC) to direct current (DC). A bridge rectifier consists of four diodes in a "bridge" configuration, as shown in the schematic below. This configuration results in a unidirectional current flow, allowing the rectifier to produce a DC voltage.The GBPC5010 T0G is a single phase, full wave, general purpose bridge rectifier with a maximum surge current rating of 1.2A at a maximum average forward current of 0.5A and a voltage rating of 50V. It is constructed with a molded epoxy body that provides improved heat dissipation, allowing for extended operation at higher temperatures and higher power dissipation than traditional bridges. The GBPC5010 T0G also features an isolated mounting tab for increased safety and durability.

Applications of GBPC5010 T0G

GBPC5010 T0G bridge rectifiers are a popular choice for many applications due to their high current rating, low voltage drop, and robust construction. The most common applications of bridge rectifiers include:

• DC power supplies
• DC-DC converters
• AC/DC motor controllers
• Hobby robots
• Doorbells and burglar alarms
• Photovoltaic (solar) systems
• Power supplies for computers, laptops and other electronic equipment

The GBPC5010 T0G is also frequently used for applications that require a small long-term current, such as in charge controllers for hybrid or electric vehicles, LED lighting, and medical equipment.

Working Principle of GBPC5010 T0G

The GBPC5010 T0G bridge rectifier works by using the current flow through the two pairs of diodes to produce a unidirectional voltage. Each diode has an anode and a cathode, with the anode being the positive terminal and the cathode being the negative terminal. When the positive side of an AC input voltage is applied to the anode of one diode, it will allow current to flow in a forward direction. At the same time, the negative side of the AC input voltage will be applied to the anode of the other diode, allowing current to flow in a reverse direction. When the two halves of the AC signal are symmetrical, current will flow through both diodes at the same time, forming a "bridge" that allows for a unidirectional current.The GBPC5010 T0G bridge rectifier also features an isolated mounting tab for increased safety and durability. This tab provides extra insulation around the bridge rectifier and ensures that the bridge rectifier is securely mounted to its mounting surface.

Conclusion

The GBPC5010 T0G bridge rectifier is a reliable and cost effective way to convert AC to DC. It is suitable for a wide range of applications, such as DC power supplies, DC-DC converters, and LED lighting. The GBPC5010 T0G is constructed with an epoxy body and an isolated mounting tab for increased safety and durability. It offers a maximum surge current rating of 1.2A and a maximum average forward current of 0.5A, while still maintaining a low voltage drop.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description