Allicdata Part #: | GEAR-ND |
Manufacturer Part#: |
GEAR |
Price: | $ 29.77 |
Product Category: | Uncategorized |
Manufacturer: | Red Lion Controls |
Short Description: | SET-UP FOR SPECIAL GEARS |
More Detail: | N/A |
DataSheet: | GEAR Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 27.05850 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Gear is an essential component of modern engineering which works to transfer and modify motion and torque between two or more bodies. The motion and torque is transferred through transmission by gears, allowing efficient and precise control of velocity and torque. The application field and working principle of gears are two important factors that need to be understood in order to correctly utilize them.
Gears can be used in a variety of different applications. Gears are commonly used in automobiles to transfer the power from the engine to the wheels of the car. In addition, gears are used in robotic arms, which allow precise control of the arm movement by using the teeth of the gear to accurately transfer and modify the motion and torque. Gears are also commonly used in elevators, as they provide a certain torque that is needed in order to lift the elevator car up a vertical shaft. Furthermore, gears are used in industrial machinery, such as lathes and mills, in order to precisely control the rotation of the tool.
The working principle of a gear is relatively simple, and relies on the use of the gear teeth to transfer motion and torque between two or more bodies. The gear teeth are designed so that they interlock with one another, allowing the motion and torque to be transferred between the bodies. The gear teeth are used to modify the speed and torque of the motion, as the size of the teeth affects the amount of torque being transferred. For example, larger teeth will transfer more torque than smaller teeth due to their larger surface area.
In addition, the direction in which the teeth are facing can also affect the motion and torque being transferred. If the teeth are facing in the same direction, then the motion and torque will be transferred in the same direction. If the teeth are facing in opposite directions, then the motion and torque will be transferred in opposite directions.
Gears are designed in such a way that it allows for efficient transmission of motion and torque. The efficiency of a gear is determined by the size of the teeth, as well as the number of teeth on the gear. The more teeth a gear has, the more efficient the transmission of motion and torque will be. Furthermore, gear ratios are also an important factor, as they allow for the adjustment of speed and torque of the motion. By adjusting the gear ratio, the user can precisely control the speed and torque of the motion.
Overall, gears are an essential component of modern engineering, and are used in a variety of different applications. Gears work by the use of the gear teeth to transfer and modify motion and torque between two or more bodies. The efficiency of the gears is determined by the size of the teeth, the number of teeth, and the gear ratio. By correctly understanding the application field and working principle of gears, they can be correctly utilized for maximum efficiency.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
EV-GEAR-EXPANDER1Z | Analog Devic... | 37.19 $ | 7 | EXPANDER (ARDUINO / PMOD ... |
CLTEQ-16-GEAR-MOD | TE Connectiv... | 261.23 $ | 1000 | BELT HEATER ACCESSORYBELT... |
CLTEQ-M105-DC-GEARMTR-1/2 | TE Connectiv... | 0.69 $ | 1000 | GEARMOTOR 130VGearmotor 1... |
CLTEQ-M19-BLDR-GEARMTR | TE Connectiv... | 1.39 $ | 1000 | GEARMOTOR 90VGearmotor 90... |
IR-1851-CLUTCH-GEAR-9 | TE Connectiv... | 3.47 $ | 1000 | GMBH THERMOFIT IR-GMBH TH... |
GEAR | Red Lion Con... | 29.77 $ | 1000 | SET-UP FOR SPECIAL GEARS |
DIODE GENERAL PURPOSE TO220
CB 6C 6#16 SKT RECP
CA08COME36-3PB-44
CA-BAYONET
CB 6C 6#16S SKT PLUG
CAC 3C 3#16S SKT RECP LINE