GF1K-E3/67A Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

GF1K-E3/67A is a single-phase, full-wave rectifier diode with a minimum breakdown voltage of 1000V. It is widely used in the field of electronics, telecommunications, medical and automotive applications due to its low forward voltage drop and low reverse leakage characteristic.

The rectifier is the most basic form of diode. It is a two-terminal electronic device that allows current flow in one direction but not in the opposite direction. The GF1K-E3/67A is a full-wave rectifier, meaning that it can rectify current from both the positive and negative half-cycles of an alternating current (AC) input. This allows a higher average output current to be obtained than in a half-wave rectifier, for a given input voltage.

When an alternating current is applied to the GF1K-E3/67A, the diode automatically switches on and off, allowing current to pass through it in only one direction. This on-off switching is based on the diode\'s characteristic of forward and reverse conductivity. The forward conductivity occurs when the diode is forward biased and electrons flow from the anode to the cathode, while the reverse conductivity occurs when the diode is reverse biased and no current passes through it.

The forward voltage drop, or VF, of the GF1K-E3/67A is typically 0.9v. This is the amount of voltage needed to maintain current flow through the diode and is a measure of the diode\'s efficiency. The reverse leakage current, or IR, of the GF1K-E3/67A is typically 0.5mA. This is the amount of current that passes through the diode in the reverse direction, even when the diode is forward biased, and is an important measure of the diode\'s quality.

The GF1K-E3/67A can be used in a number of applications, including as a power supply rectifier, as a signal conditioner, or as a voltage or current regulator. It is ideal for high-voltage, low-frequency circuits due to its low forward voltage drop and low reverse leakage current. It can be used in applications such as lighting, motor drives, industrial controls, medical equipment, telecommunications, power supplies, AC power distribution, and automotive applications.

In conclusion, the GF1K-E3/67A is a single-phase, full-wave rectifier diode with a minimum breakdown voltage of 1000V. It has a low forward voltage drop, low reverse leakage current, and can be used in applications such as lighting, motor drives, industrial controls, medical equipment, telecommunications, power supplies, AC power distribution, and automotive applications. Its wide range of uses makes it a useful tool for engineers, technicians, and hobbyists alike.

The specific data is subject to PDF, and the above content is for reference