GI250-1-M3/73

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are electrical components that permit the flow of electric current in one direction only, and are used in applications such as rectifying AC to DC. The GI250-1-M3/73 is a single phase rectifier diode, and is particularly suitable for use in the switching power supply, power rectifier, and motor control circuits. This article will discuss the application field of GI250-1-M3/73, and its working principle.

Common applications for GI250-1-M3/73 include solar panels and wind turbines for power conversion, motor control for industry automation, uninterruptible power supplies, and laboratory and medical equipment where a stabilized output is required. It is also widely used in automotive power converters and power switching.

The GI250-1-M3/73 diode is a single phase, fast rectifier diode which is best used for applications that involve full-wave or bridge rectification. These diodes have a 400V maximum repetitive peak inverse voltage, 1.5A current rating and can operate at temperatures up to +125°C. The GI250-1-M3/73 is also equipped with a built-in surge absorption circuit and can handle a maximum of 800A peak surge current.

The most common circuit for full-wave rectification is the bridge rectifier, which is composed of four diodes arranged in a bridge formation as illustrated here:

The bridge rectifier is the most efficient mode of full-wave rectification, since it converts the entire peak-to-peak AC voltage to DC. In the circuit above, the alternating current is fed into points A and B, and two opposite rectified AC voltages appear at points C and D. The GI250-1-M3/73 is suitable for use in this circuit as it has the right current rating and temperature capabilities.

The GI250-1-M3/73 is also capable of half-wave rectification, in which the diode is used to only conduct current on the positive half of an AC sine wave. This is simpler than the bridge rectifier circuit, but less efficient and results in the output DC voltage being lower than the peak AC voltage. This mode of rectification is commonly used in mains powered devices such as smoke alarms and clocks.

In conclusion, the GI250-1-M3/73 is a single phase rectifier diode which is suitable for both full-wave and half-wave rectification. It has a wide range of applications, and is capable of withstanding temperatures up to +125°C and 800A peak surge currents. With its built-in surge absorption circuit, the GI250-1-M3/73 is an ideal diode for rectifying applications in the switching power supply, power rectifier, and motor control circuits.

The specific data is subject to PDF, and the above content is for reference