GLAD01A4J

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Snap Action, Limit Switches are used to detect the presence or absence of an object, typically by actuating a lever or plunger, and are pretty useful for industrial applications. The GLAD01A4J is a specific type of limit switch that is designed for low voltage and low current applications that also have single side, double side detection and a changeover circuit.

The GLAD01A4J can be broadly classified into two major categories: the wetted type and the non-wetted type. The wetted type of limit switch can be used in a process environment or in a hazardous or contaminated environment where the switch is exposed to moisture, liquids or other corrosive materials, while the non-wetted type is used in a dry or non-hazardous environment.

The GLAD01A4J is a two-pole snap action, limit switch, which means that it has two operating modes: the ON position and the OFF position. The ON position is triggered when the plunger is actuated by an object, and the switch is held open by the force of the plunger. The OFF position is triggered when the plunger is released, and the switch is closed. This means that when the plunger is actuated, the switch opens and when the plunger is released, the switch closes.

The GLAD01A4J is most commonly used as a safety switch, because it is designed to detect any kind of objects that are in its vicinity. When an object is detected by the switch, it will actuate the plunger, and the switch will open, which will then cause a signal to be sent to another device or system. This signal can then be used to shut down or start up the system, or to alert personnel of the presence of an object.

The GLAD01A4J also has a changeover circuit, which allows it to operate in two positions. The first position is the single side, which means that after the switch has been actuated, it will stay in the same position until it is manually changed. The second position is the double sided, which means that after the switch is actuated, it will switch positions, and can be set to switch between positions depending on the application.

The GLAD01A4J is designed for low voltage and low current applications, and is rated up to 250 volts. It is made from high quality materials and is designed to provide reliable performance in industrial applications. The switch is suitable for use in a variety of environments, including hazardous, wet or dry conditions.

In conclusion, the GLAD01A4J is a two-pole snap action, limit switch that is designed for low voltage and low current applications. It is a reliable and robust switch, and can be used in a variety of industrial applications. It has two operating modes: the ON position, which is triggered when the plunger is actuated by an object, and the OFF position, which is triggered when the plunger is released. It also has a changeover circuit, which allows it to switch between positions, depending on the application.

The specific data is subject to PDF, and the above content is for reference