GLDC01A1Y

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Snap Action, Limit Switches or Snap Action Switches are mechanical blockage components created with the purpose of forming binary electrical circuits. They open circuit when actuated and close when reset. The GLDC01A1Y Snap Action, Limit Switch consists of a large number of changes and elements, such as a switch arm, latch, frame, actuator, lever, and other components.

The GLDC01A1Y is a particular type of snap action, limit switch designed for extended life, latching capabilities and reliability in industrial domain. It is designed to heavy-duty applications that require mechanisms to switch large currents and voltages. It requires a considerable amount of pressure for operation, but there must be enough leverage force that does not require strong physical effort for operation. The added actuator reinforcement makes the actuator resistant to deformation and accidental operation.

The GLDC01A1Y adopts latest technologies and components which ensure not only smooth operation but also higher levels of reliability and durability. By using reinforced actuator, force transmission device and a particular latch, the durability can be increased significantly. This switching mechanism is designed to open/close circuits with heavy current rates, and to meet different switching intensity levels.

The GLDC01A1Y can be used in a wide range of applications, such as when there is an overload, over-current, under-voltage, excessive temperature, or other fault condition the switch should open the circuit. This switch can also be used when the machine is powered up, after a certain number of laps, when the machine is shutting down, and in applications involving hostile environments.

The GLDC01A1Y switch mechanism has a pair of movable contacts suspended inside a frame and connected to an actuator. When the actuator is actuated, the movable contacts move to connect with a stationary contact, thus closing the circuit. The contacts will open again when the actuator is released, thus opening the circuit. This mechanism is actuated manually via a lever arm, which increases the force needed to actuate the switch while avoiding excessive physical exertion.

The GLDC01A1Y switching mechanism works by the principle of lever and gear effect. The motion of the lever arm is transmitted to the movable contacts via a gear system, allowing for a softer contact movement. This prevents the risk of contact welding and increases the contact\'s life. There are also preventive mechanisms in place to ensure that the contacts are properly engaged and do not break aparts due to high contact pressure.

In conclusion, the GLDC01A1Y Snap Action, Limit Switch is designed for extended life, latching capabilities and reliability in industrial applications. It is designed for heavy-duty applications that require mechanisms to switch large currents and voltages. The switch mechanism has a pair of movable contacts suspended inside a frame and connected to an actuator which moves to connect with a stationary contact, thus closing the circuit. The motion of the lever arm is transmitted to the movable contacts via a gear system, allowing for softer contact movement. It also acts as a preventive mechanism to ensure that contacts are properly engaged and do not break open due to high contact pressure.

The specific data is subject to PDF, and the above content is for reference