GLL4738-E3/96

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The GLL4738-E3/96 is a single Zener diode from the semiconductor device family. It is typically used for protection in applications such as voltage regulation and device isolation. A Zener diode works by allowing current to flow in one direction, but only when the applied voltage exceeds a certain level. When the voltage drops, it is blocked, preventing a specific dose of power from being applied to the circuit.

A Zener diode\'s main application is in circuit protection. It acts as a failsafe to the system, protecting it from destructive power. If a voltage spike is detected (usually due to a faulty component), the Zener diode will be triggered, diverting the power away from the sensitive parts of the circuit. This protection feature also helps conditionals circuits where AC signals passing through a diode can be filtered, reducing any noise or interference.

When it comes to the GLL4738-E3/96, its maximum voltage is 98 V, with a breakover voltage of 78 V at 6 mA. The operator can set the voltage at which the Zener diode engages in order to give the user more control over their circuit protection. It can be used in AC and DC circuits, both low and high voltage, making it a very versatile component that can be implemented in a variety of applications.

Before deciding to use the GLL4738-E3/96, the user must take into account certain aspects, such as the forward voltage of the diode, which needs to be higher than its reverse voltage, it also needs a steady current for the Zener diode to work as intended.

It is important to also establish that the Zener diode is the best way to achieve circuit protection, as there are many alternatives that may be more cost effective or efficient in certain cases. In addition, Zener diodes can generate heat when used for long periods of time, increasing the thermal load on the circuit. This needs to be taken into account when choosing a diode for a specific application.

The working principle of a Zener diode is relatively simple. It allows current to flow in one direction when a certain voltage is applied. However, when the voltage drops below the set threshold, the diode blocks incoming current and diverts it away from sensitive parts of the circuit. In the case of the GLL4738-E3/96, the maximum voltage is 98 V, with the break over voltage being 78 V and 6 mA.

In conclusion, the GLL4738-E3/96 is a single Zener diode ideal for a variety of circuit protection applications. It is able to operate in both AC and DC circuits, withstanding high and low working voltages. The set breakover voltage allows users more control over the circuit\'s protection and can also be used for AC signal filtering. Care must be taken to ensure the diode is the best solution for the intended application, as there may be better and more cost effective options.

The specific data is subject to PDF, and the above content is for reference