GN350ESZ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays (SSRs) are frequently used in control and automation systems for many applications. SSRs are solid-state devices that are used in place of traditional electromechanical relays, which activate a load when an external signal is applied. The GN350ESZ is one of the most commonly used SSRs in industry.

The GN350ESZ is a zero-cross switching power SSR with fast response. It has a high switching rating capacity – it can handle up to 350VAC/40A. This SSR is designed to switch AC loads on and off in response to an external DC control signal or a temperature controller. The GN350ESZ is typically used in applications such as motor control, temperature control, lighting, and heating.

The working principle of the GN350ESZ is based on the use of semi-conductor technology to provide a layer of insulation between the control circuit and the load circuit. An opto-isolator is used to control the device, which isolates the control circuit from the load circuit electrically. The opto-isolator consists of an infrared light emitting diode (LED) and an NPN phototransistor. The LED is connected to the input of the opto-isolator and the phototransistor across the output. When the control signal is applied to the input of the opto-isolator, the LED will emit light which can be detected by the phototransistor. This causes the phototransistor to conduct, which in turn energizes the main power circuit of the GN350ESZ.

The GN350ESZ has two main components for its operation; the main power circuit and the control circuit. The main power circuit consists of a triac and an SCR used in parallel to control the load. The triac is used to switch ON and OFF the load, while the SCR is used as a protection circuit. Both the triac and SCR are connected across the AC load to be controlled. The triac is triggered by the gate signal generated by the control circuit. The control circuit consists of an opto-isolator, a diac and a resistor. The opto-isolator is used to isolate the control signal from the load circuit. The diac is used to provide a positive switching voltage to the gate of the triac. The resistor aids in limiting the current through the diac.

In summary, the GN350ESZ is a solid state relay which is used in control and automation systems, primarily for motor control, temperature control, lighting and heating applications. The GN350ESZ uses opto-isolator technology to switch an AC load on and off as required. It also incorporates a main power circuit which uses a triac and an SCR to control the load, as well as a control circuit which includes a diac and a resistor. The GN350ESZ is able to handle high power loads due to its high switching rating capacity.

The specific data is subject to PDF, and the above content is for reference