GNR10DHZ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays (SSRs) are a type of switching device that uses a solid-state switch, such as a semiconductor, to isolate and control a circuit. SSRs are commonly used when higher sensitivity and higher voltage/current protection is required than that of a conventional electromechanical relay. The GNR10DHZ, specifically, is a type of SSR that is suitable for high voltage and current applications. It is capable of handling up to 10 A at 600 V, with a controlled opening time of less than 25ms.

The GNR10DHZ is composed of a DC-DC converter, a thyristor, a zero-cross detector, and a current limiting device. It is designed to provide a high current switching capability with a minimum of electrical noise. The DC-DC converter is designed to convert the input voltage to a voltage suitable for the thyristor switching device. The zero-cross detector helps to ensure that the thyristor is only fired when the voltage input is zero. This helps prevent any inrush current through the circuit that could damage or cause a short. Finally, the current-limiting device helps to ensure that the thyristor does not draw too much current.

One of the primary advantages of the GNR10DHZ is its ability to act as an interface between DC and AC loads. This makes it the ideal choice for higher voltage or current applications, as it is capable of handling up to 10A at 600V. In addition, it also provides an isolation between the load and the supply, which helps to protect the load from over-voltage, over-current, and electrical noise. As such, the GNR10DHZ can be used to isolate and control high current and voltage circuits, such as those found in industrial machinery, industrial automation, motor control, and process control.

The GNR10DHZ is also a widely used device with many applications. It can be used to control and switch motors, solenoids, power converters, printers, and other devices. It is also commonly used to switch AC and DC signals. For example, it can be used to switch a low voltage DC signal to a higher voltage AC signal, such as in an inverter system. Additionally, it can be used to switch a high voltage AC signal to a lower voltage DC signal.

The GNR10DHZ is considered to be a fast, reliable, and efficient switching device. It has a wide temperature range of - 40°C to + 125°C, and a maximum switching frequency of 35 kHz. Additionally, it has a peak surge voltage handling capacity of up to 4,300 volts, making it suitable for use in high voltage applications. The device also has a fast and reliable detection time of less than 25ms, which helps to ensure a reliable switch operation.

In conclusion, the GNR10DHZ is a high current and voltage switch designed specifically for industrial and commercial applications. It provides an isolation between the load and the supply, and has a wide temperature range and a maximum switching frequency of 35 kHz. Additionally, it has a fast and reliable detection time of less than 25ms, making it reliable in a number of applications. The GNR10DHZ is the ideal choice for higher voltage or current applications, as it is capable of handling up to 10 A at 600 V.

The specific data is subject to PDF, and the above content is for reference