GP15A-E3/54

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

GP15A-E3/54 rectifier diodes are widely available and are commonly used in AC to DC conversion. In an AC circuit, they act as an electronic switch, allowing current to flow in one direction and blocking current flow in the other direction. These devices are especially useful in circuits requiring high current or high voltage ratings.

A basic diode consists of a semiconductor material with two electrodes, the cathode and the anode. In operation, the diode is reverse biased, meaning that the voltage at the anode is lower than the voltage at the cathode. This causes current to flow from the cathode to the anode, thus allowing it to act as a switch.

The GP15A-E3/54 has a forward breakover voltage of 54V, making it an ideal choice for applications such as mains voltage rectification, or motor control. The diode can be used as a signal diode, providing a low forward voltage drop and enabling modulation of an electrical signal. It is also suitable for low-voltage applications, where its reverse voltage rating of 390V and reverse current rating of 150mA make it ideal for use as a power diode.

The GP15A-E3/54 is a single-phase silicon rectifier, featuring two cylindrical pins for mounting and can easily be inserted into a PCB. The diode is constructed from a silicon die with an insulated, high-temperature semiconductor case for added protection. The device is rated for a maximum operating temperature of 150°C, with a typical forward voltage drop of 1.9V at 20mA.

The most common application field for the GP15A-E3/54 is in low-voltage power supplies. This is because it has a forward voltage of just 1.9V, allowing it to efficiently convert AC to DC. The diode can also be used as a current regulator in motor control circuits, where it will provide a highly efficient and safe means of controlling motor speeds and currents.

The working principles behind the GP15A-E3/54 are fairly simple. When connected to an AC voltage source, it becomes a rectifier, allowing current to pass from the cathode to the anode in one direction only. This helps to keep the voltage level stable and prevents electrical noise from interfering with the circuit. When it is connected to a DC voltage source, it serves as a signal diode, clamping the maximum positive and negative voltages and helping to ensure an evenly modulated electrical signal.

The GP15A-E3/54 is an extremely versatile device and can be used in a wide range of applications. Its low forward voltage drop, maximum reverse voltage and temperature ratings make it a cost-effective solution to AC to DC conversion and other applications where voltage regulation is required. It is also a great choice for low-voltage circuits, providing protection against over-current and reverse-polarity conditions.

The specific data is subject to PDF, and the above content is for reference