GS1R-LTP Discrete Semiconductor Products |
|
Allicdata Part #: | GS1R-LTPTR-ND |
Manufacturer Part#: |
GS1R-LTP |
Price: | $ 0.04 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Micro Commercial Co |
Short Description: | DIODE GEN PURP 1.3KV 1A DO214AC |
More Detail: | Diode Standard 1300V 1A Surface Mount DO-214AC (SM... |
DataSheet: | GS1R-LTP Datasheet/PDF |
Quantity: | 1000 |
7500 +: | $ 0.03572 |
15000 +: | $ 0.03175 |
37500 +: | $ 0.02977 |
52500 +: | $ 0.02646 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Diode Type: | Standard |
Voltage - DC Reverse (Vr) (Max): | 1300V |
Current - Average Rectified (Io): | 1A |
Voltage - Forward (Vf) (Max) @ If: | 1V @ 1A |
Speed: | Standard Recovery >500ns, > 200mA (Io) |
Current - Reverse Leakage @ Vr: | 5µA @ 1300V |
Capacitance @ Vr, F: | 15pF @ 4V, 1MHz |
Mounting Type: | Surface Mount |
Package / Case: | DO-214AC, SMA |
Supplier Device Package: | DO-214AC (SMA) |
Operating Temperature - Junction: | -55°C ~ 150°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A GS1R-LTP rectifier is a single phase device with a maximum forward-voltage drop of 600 V, an average rectified current of 1 Ampere and a reverse recovery time of less than 1 µs (microsecond). It is used in a variety of applications, such as Power Factor Correction, EMI/RFI (Electro-Magnetic Interference Reduction/Radio Frequency Interference Reduction), Voltage Sensitive Switches and Power Supplies.
In Power Factor Correction, rectifiers are used to convert alternating current (AC) electricity into direct current (DC). This is done by allowing half of the AC cycle to be converted into DC, while the other half is blocked, so that the average DC output is greater than the AC output. Rectifiers accomplish this by using the electrical property of the PN junction inside of the device. As the current is applied to the junction, the voltage drop across the diode increases until it reaches the "forward on" condition (known as the breakover voltage), at which point current begins to flow through the diode. Since the diode will only allow current to flow in one direction (which is from from positive to negative, or from anode to cathode), the current will continue to flow in the same direction. As the current is reversed, another forward on condition is established, allowing current to flow in the forward direction once more. This process is known as rectification, and it is the basis for the operation of GS1R-LTP rectifiers.
In EMI/RFI reduction, rectifiers are used to reduce the EMI/RFI noise levels in electronic systems. When a rectifier is placed between a source and an electronic device, it allows some of the high frequency noise to pass through, while blocking the lower frequency voltage peaks. This is helpful in preventing interference in sensitive electronic equipment and can help reduce the amount of power wasted by dissipating the energy as heat rather than being absorbed by the load or system.
In Voltage Sensitive Switches, rectifiers can be used to detect when a specific voltage has been reached, and then automatically switch the power on or off, depending on the voltage detected. This is useful for controlling the power supply to devices such as motors, lights, computers, and security systems.
And finally, in Power Supplies, rectifiers are used to convert AC into DC at the input and then filter and regulate the output voltage at the outputs, depending on the load requirements. This ensures that the correct voltage level is supplied to the device.
The GS1R-LTP rectifier is designed to be a small, efficient and reliable device, suitable for a wide range of applications. It features an adjustable forward-voltage drop, allowing users to tune the operating parameters to best suit the needs of their systems. The rectifier also boasts an optimized reverse-recovery time of less than 1 µs, making it ideal for use in high-speed switching applications. In addition, the device has low forward-voltage drop and maximum reverse-current, making it an ideal solution for low-voltage applications.
In summary, the GS1R-LTP rectifier offers a reliable, adjustable, and efficient solution for a variety of applications, including Power Factor Correction, EMI/RFI reduction, Voltage Sensitive Switches and Power Supplies. Its features and performance make it a great choice for any project.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
GS1R-LTP | Micro Commer... | 0.04 $ | 1000 | DIODE GEN PURP 1.3KV 1A D... |
Diodes - General Purpose, Power, Switchi...
DIODE SCHOTTKY 40V 500MA SC76Diode Schot...
DIODE GEN PURPOSE DO-204ALDiode
DIODE GEN PURP 400V 1A DO41Diode Standar...
DIODE SCHOTTKY 20V 1A DIE 1=400Diode Sch...
DIODE GEN PURP 400V 500MA D5ADiode Stand...