GTC11A-6-50

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

GTC11A-6-50 is a type of bridge rectifier, which is widely used in the application of bridge rectification method for conversion from AC power to DC power. This product is basically composed of six diodes.

The components used for bridge rectifiers range from alternating current to direct current. The purpose of bridge rectifiers is to convert alternating current into direct current. The bridge rectifier will provide full-wave rectification while simultaneously reducing the internal impedance of the device. This type of rectification is especially effective in circuits that require voltage regulation or voltage control.

The working principle of GTC11A-6-50 bridge rectifier is based on the P-N junction diode. This type of bridge rectifier requires the positive and negative cycles of the alternating current (AC) to be connected to either the anode or cathode of a semiconductor diode. When the cycle of the AC voltage is connected to one of these components, it creates an electric current that flows through the circuit.

The output voltage from the bridge rectifier is not a pure DC voltage, but a pulsating DC voltage. The waveform of the output voltage is usually similar to a square wave. This is because the diodes turns on and off in each half cycle of the input AC voltage. However, the diodes act as a load and create a filtering effect that makes the output voltage a more DC waveform than the output of a half wave rectifier.

The bridge rectifier is used in various applications such as power supplies, motor drives, amplifiers, and signal conditioning. In addition, GTC11A-6-50 bridge rectifier can be used in low-power applications such as heating circuits, LED driver circuits, and computer central processing unit (CPU) power supplies.

This type of bridge rectifier is able to provide reverse and forward voltage protection. The peak reverse voltage of the GTC11A-6-50 bridge rectifier is from 1000V to 1300V, and the maximum forward current is from 7.5A to 11A. It has a standard v-0 flame-retardant class plastic shell and minimum wire bending space. In addition, it has a high flow temperature and is reliable in operation.

The GTC11A-6-50 bridge rectifier is widely used in a variety of applications, such as AC and DC motor drives, LED lighting, and other audio-visual equipment, as well as automotive, transportation, military, and industrial applications. It is a reliable, cost-effective bridge rectifier and is able to withstand high-frequency switching.

The specific data is subject to PDF, and the above content is for reference