H11D1SR2VM Isolators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Today’s modern electronics depend on optoisolators for noise reduction and integrating several systems into one, ensuring reliable and accurate performance and operation over long periods of time. Optoisolators come in several designs and one of the most popular designs is the H11D1SR2VM. It essentially contains an LED, a photocell, and a base connection between them. When light is sent through the LED, it hits the photocell and the output transistor is activated.

The H11D1SR2VM provides isolation between input and output circuits for high accuracy and low noise transfer of a signal. It has a low operating voltage range of 2.4 to 5.5 Volts and low current consumption of 1.5 mA, making it a very reliable and cost-effective choice for many electrical circuits. Its working principle is quite simple and intuitive. When the input signal voltage changes, the photodiode and LED in the circuit will cause the photocell to output an appropriate signal that can be amplified at the output, providing the desired voltage.

The H11D1SR2VM is an excellent choice for a variety of applications such as motor drivers, infrared remotes, analog or digital comparison systems, thermometers, and optical isolators. For motor driver applications, it can be used to switch the motor’s direction and speed by controlling the voltage applied to the input and output stages. In infrared remotes, it can be used to sense the incoming signals in the infrared range and output a corresponding signal to the microcontroller. In comparison systems, it can be used to compare two signals and output the difference.

Furthermore, the H11D1SR2VM is also ideal for thermometers, because it can detect a very slight temperature difference and output a corresponding voltage signal. This signal can then be processed by the microcontroller to indicate the temperature reading. Additionally, the H11D1SR2VM can also be used as an optical isolator in systems where the input signal from one circuit must be kept electrically isolated from the output in another circuit.

In summary, the H11D1SR2VM optoisolator is an excellent choice for applications where noise reduction and integration of several systems is needed. It uses an LED, a photocell, and a base connection between them to transfer input signals with low noise and high accuracy. It can be used in motor drivers, infrared remotes, comparison systems, thermometers, and optical isolators, and it is reliable and cost-efficient.

The specific data is subject to PDF, and the above content is for reference