H16WD6090G-10

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The H16WD6090G-10 is an industrial grade solid state relay (SSR) that is designed for use in a variety of different applications. The solid state relay is a type of switch which uses no moving parts and instead uses a voltage-controlled electronic circuit to do the work of switching. It has a nominal on-state current of 10A and an off-state leakage current of less than 0.1mA. The device is also designed to have high immunity to shock and vibration, as well as a rated working life of up to 200,000 hours.

A solid State Relay is a type of electrical switch that is controlled by an electrical current and voltage. It works by using an electrical current to switch a circuit from open to closed or from closed to open states. This is done via the action of an electromechanical or solid state device that directly controls the state of the circuit. In order for the relay to open or close, the input voltage must be greater than the Hold Off Voltage (HO) or must be less than the Holding On Voltage (HO), respectively.

The H16WD6090G-10 has a wide array of applications. It can be used to control small and medium sized appliances, as well as to interface with automation systems, motor drives, and other industrial applications. It can also be used to control the switching of high power applications, such as lights and pumps. It is also applicable in audio-visual applications, as it is designed to have low switching noise so that the transition between on and off does not generate a loud noise.

The H16WD6090G-10 is designed to work in a number of different ways. It can be configured as a Normally Open (NO) or Normally Closed (NC) type relay, depending on what type of switching action is required. When the input voltage is below the HO, the contacts on the relay are open and no current flows through the load. When the voltage rises above the HO, the contacts close and current begins to flow to the load. It can also be configured as a “Latching” relay, which means that when the voltage goes below the HO, the relay stays in the same position. The latching relay is useful for applications where the switching of the contacts needs to be done quickly and efficiently, such as a motion sensor application.

The H16WD6090G-10 is also designed to be reliable and safe. It features protection against damage from voltage spikes, reverse voltage, overheat, and short circuit. Since the relay does not have any mechanical parts, its switching operation is quiet and reliable. It is also designed to be environmentally friendly, as it does not require the use of any hazardous chemicals or materials in its manufacture.

The H16WD6090G-10 is a reliable and versatile solid state relay that can be used in a wide range of industrial and commercial applications. It is designed to provide reliable switching action, while at the same time offering high levels of protection against common environmental and electrical hazards. It also offers a range of features and configurations, enabling it to be used in a variety of applications.

The specific data is subject to PDF, and the above content is for reference