H2AAG-10104-B6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires and Pre-Crimped Leads are two very different category of equipment used in the assembly of certain products.

Jumper wires are short electrical conductors that are generally used to provide electrical connection between two points of a circuit. They are usually pre-terminated with tin-plated copper or nickel-plated copper contacts on either end so that they are easy to install. Jumper wires are typically made from insulated copper or stainless steel wires. The insulation is usually composed of PVC (polyvinylchloride) or PTFE (Teflon).

Pre-Crimped Leads are conductors that are smaller than the ones used for jumper wires and are designed to be crimped to the terminals of devices in order to provide an electrical connection. Pre-Crimped Leads are usually pre-cut to length and pre-tinned in order to reduce installation time. In some cases, the pre-crimp connectors are also pre-assembled. The crimp connectors are generally composed of tin-plated copper or nickel-plated copper contacts.

One particular type of pre-crimp leads are H2AAG-10104-B6 connectors, which are composed of an insulated cable and a pre-crimped terminal on either end. The terminals are composed of tin-plated copper or nickel-plated copper contacts. H2AAG-10104-B6 connectors are designed for use in the assembly of certain electronic products and provide a strong and reliable termination to the device terminals.

The working principle of H2AAG-10104-B6 connectors is fairly simple. The insulated cable is inserted into the pre-crimped terminal and the crimp connection is completed by either using a crimping tool or by soldering. This creates a strong and reliable electrical connection between the insulated cable and the device terminal. The insulation surrounding the inner conductors protects the connection from unwanted electrical interference or short circuits.

H2AAG-10104-B6 connectors are used in a wide variety of applications including automotive, military, aerospace, industrial, medical, and consumer electronics. They are typically used in high-reliability applications and where vibration or extreme temperature changes are likely to occur. They are also often used in the assembly of flat cables and flex-circuits due to their small size.

In summary, H2AAG-10104-B6 connectors are pre-crimp leads that are designed for use in a variety of applications. They are composed of an insulated cable and pre-crimped terminals on either end, and the working principle is based on creating a strong and reliable connection between the cable and the device terminal by using either a crimping tool or by soldering. As such, H2AAG-10104-B6 connectors are an essential component in the assembly of certain products.

The specific data is subject to PDF, and the above content is for reference