H2ABG-10105-B8

Series:	DF3
Part Status:	Active
Lead Free Status / RoHS Status:	--
Contact End:	Pin to Socket
Moisture Sensitivity Level (MSL):	--
Length:	5.00" (127.00mm)
Wire Gauge:	28 AWG
Contact Finish:	Gold
Color:	Black
Contact Finish Thickness:	--
Number of Rows:	1
Number of Conductors:	1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

H2ABG-10105-B8 is a jumper wire that comes pre-crimped with a white, gold-plated, beryllium copper (B8), 0.10mm thick contact and a black, gold-plated, tinned copper (T1) contact. This type of jumper wire is most commonly used in electrical/electronic components as a way to quickly connect two connections with a minimum of effort. The arrangement of the contacts allows them to be held in place by two wires, the wire on the white contact for insulation and the wire on the black contact for the connection.The white contact will typically be connected to the positive side of the circuit while the black contact will be connected to the negative side. This arrangement ensures that, when correctly wired, the circuit is electrically isolated and the jumper wire carries an electrical current only when the power is applied. Jumper wires are also available with a variety of other color combinations, such as red and black, for increased flexibility.

Pre-Crimped Leads

H2ABG-10105-B8 is also available as a pre-crimped lead, allowing for even easier installation. This type of lead is pre-crimped to the same size and type of contact as the jumper wire. The advantage of using this type of lead is that a secure connection can be made without any additional crimping or soldering. The pre-crimped lead can be used in any electrical/electronic component as it has the same functionality as a conventional jumper wire.Additionally, pre-crimped leads offer superior contact with minimal resistance, which can provide a reliable current flow, reducing power loss. When connected, the white contact is typically connected to the positive side of the circuit while the black contact is connected to the negative side. The contacts can also be soldered together for additional security.Pre-crimped leads are a cost-effective solution for applications where the time and effort of crimping and soldering jumper wires can be prohibitive. In addition, they offer a more secure connection than a standard jumper wire.

Conclusion

H2ABG-10105-B8 is a versatile connector that can be used in a variety of applications. It is available as a jumper wire and as a pre-crimped lead for hassle-free installation. With both of these versions, the white contact typically connects to the positive side of the circuit and the black contact to the negative side. Jumper wires provide an easy way to connect two components and pre-crimped leads offer the same connection with the added benefit of secure contact with lower resistance. Both of these solutions can provide an efficient connection in any electrical/electronic application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description