H2BXT-10104-A4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper wires are electrical wires that are used to connect two points in an electrical circuit. They are commonly used to connect two points in a circuit board, like those in a computer, or to connect two points on the same board. The wires come in different lengths, and can be used with various types of electrical components such as a capacitor, resistor, or IC.

Jumper wires are usually made of copper, but can also be found in other materials such as plastic or metal. They can be found in both single and double-stranded configurations to accommodate different types of signals. They are typically soldered into place, but in some cases may be crimped or screwed onto the board.

Pre-Crimped Leads

Pre-Crimped Leads are electrical wires that are pre-crimped to a connector at one end and either soldered or crimped onto the circuit board at the other. This style of wire is used in many electronics applications such as automotive and robotic applications. Unlike jumper wires, pre-crimped leads are designed to connect two existing points without having to cut or re-solder wires.

The size of a pre-crimped lead will depend on the application. For instance, larger pre-crimped leads with a larger diameter may be used to carry higher amounts of electricity or in applications where space is limited. The insulation material may vary as well, with silicone and Teflon being the most common.

H2BXT-10104-A4 application field and working principle

The H2BXT-10104-A4 is a type of pre-crimped lead, commonly used for automotive and motor control applications. It features a single stranded wire construction with an insulated PVC sleeve, and is terminated at one end with a sealed connector. The other end is pre-crimped for easy wire splicing and connection to the circuit board.

The H2BXT-10104-A4 is designed to provide a secure connection between two points in a circuit board, and is capable of transferring high voltage signals and currents. It can be used in applications where space is limited, and is resistant to water and shock. It is typically used to connect computer components, automotive components, and motor control electronics.

The working principle of the H2BXT-10104-A4 is fairly straightforward. The wire end of the lead is inserted into a connector on the circuit board, and the connector and lead are then soldered into place. The connector is tightly sealed to ensure a secure connection, and as long as the connection is properly made, the lead will help to ensure a proper flow of electricity.

The specific data is subject to PDF, and the above content is for reference