H3AAG-10112-W6

Jumper Wires

Jumper wires are electrical connectors used to bridge two points of an electrical circuit. They can be used to connect two points of a circuit, eliminating the need for soldering. Jumper wires are typically thin and flexible, often made from 22 or 24-gauge stranded wire. They are often connected via a crimp or solder joint, or secured with a terminal block. jumper wires can be insulated with shrink wrap or used in panel mount applications.

H3AAG-10112-W6 is a good example of a jumper wire. It is 1.5 meters long with an insulation diameter of 3mm.It is a 2-conductor red/black jumper wire with lug terminals, pre-crimped leads. It has a current rating of 30A, and a voltage rating of 600V, making it ideal for automotive applications.

Pre-Crimped Leads

Pre-Crimped Leads are electrical connectors with an already-crimped wire on each end. The crimp is designed to make a reliable electrical contact between the wire and the connector housing.This feature eliminates the need for soldering or crimping, making them much faster and easier to install than standard connectors. Pre-crimped leads are available in a variety of sizes and configurations, such as 2-pin and 4-pin connectors.

H3AAG-10112-W6 is an example of a pre-crimped lead. It is 1.5 meters long with an insulation diameter of 3mm. It is 2-conductor red/black pre-crimped lead with lug terminals. It has a current rating of 30A and a voltage rating of 600V, making it ideal for automotive applications.

Working Principle

The working principle behind jumper wires and pre-crimped leads is the same. Both use a crimp to make a secure electrical connection between the wire and the connector housing. This connection must be secure enough to ensure current can flow without interruption. The most reliable way to ensure this is by using an insulated crimp. These are crimped with a tool specifically designed for the job, and the crimp is then insulated with shrink wrap or other suitable material.

The H3AAG-10112-W6 jumper wire and pre-crimped lead use the same principle. They are 1.5 meters long with an insulation diameter of 3mm. The two-conductor red and black wires are pre-crimped with lug terminals. This provides a stable electrical connection that is capable of carrying up to 30A and 600V, making it suitable for automotive applications.