H3AAT-10112-N8

Jumper Wires

Jumper wires are an essential tool in a wide range of engineering, prototyping, breadboarding and educational projects. These flexible wires are used to connect two points on a circuit board or prototype without soldering. Typically, these are thin cables with male or female pins on either end. They are available in different lengths and ratings, depending on the application they will be used for.

Jumper wires come in two different types – pre-made or prefabricated. Pre-made jumper wires are ready to use and don’t require additional steps for preparation. Prefabricated jumper wires require crimping to ensure the necessary connection between two points on a board. The wires must be crimped with the correct tool in order to guarantee a robust and reliable connection.

The H3AAT-10112-N8 jumper wire belongs to the pre-made category. This jumper wire is 15 cm long and has 2 mm spaced black and red male pins on both ends. It is insulated in 13 AWG flame retardant PVC, and it is suitable for a range of applications where short-term connections are needed without soldering.

Pre-Crimped Leads

Pre-crimped leads are another type of flexible wire used to make electrical connections without soldering. These types of leads have the conductor and insulation already crimped on the terminals of both ends. This type of lead is excellent when quick and reliable connections are required, as the process of pre-crimping eliminates the need for crimping the leads just prior to use.

The H3AAT-10112-N8 pre-crimped lead belongs to this category, it has an insulated 13 AWG wire with 2 mm spaced black and red male pins on either end. As with pre-made jumper wires, this pre-crimped lead is ideal for a range of applications requiring short-term connections, as it comes already prepared for use and doesn\'t require additional preparation.

In addition to the pre-crimped leads, many electronics companies also offer a range of additional accessories for electrical connections. Crimp tools, strip tools and wire protector sleeves are all tools which may be used to further secure and protect the connection.

Working Principle

The working principle of the H3AAT-10112-N8 pre-crimped lead is similar to that of the pre-made jumper wires but with the benefits of the additional pre-crimping. This pre-crimped lead can be employed in any application where an electrical connection need to be made without soldering. It only needs to be plugged into the desired two points on the board and it will ensure safe and reliable operations without risk of loose wires or faulty connections.

The other accessories available to aid in ensuring the connection is secure are used in conjunction with pre-crimped leads. The wires are stripped and stripped down to the desired length, then the terminals and wires are crimped together with a crimping tool. Once the wires are crimped they can then be protected with a wire protector sleeve for added security and reliability.