H3LIS100DL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The H3LIS100DL is an ultra-low power, three-axis linear accelerometer. This accelerometer combines high performance with low power consumption, making it suitable for applications in mobile products.

The H3LIS100DL accelerometer measures the magnitude and direction of changes in velocity in 3 axes. It uses a 0.9V to 3.6V input range span and responds to vibrational input with a range of ±2.1g. The low temperature coefficient and low power consumption make the H3LIS100DL accelerometer suitable for many applications such as noise and vibration monitoring.

The accelerometer is an electronic device that is able to measure changes in the acceleration of an object. In the case of a accelerometer, these changes are detected in three axes in a single chip. The accelerometer contains two basic components, the sensing element and the signal conditioning circuitry. The sensing element is typically a low-mass cantilever or micro-machined spring structure that is attached to a sense-plate. The sense-plate can be moved in response to changes in acceleration. When it is moving, it generates a voltage across the sensing element. The output of the sensing element is then conditioned by the signal conditioning circuitry in the accelerometer, which converts the output into a form that can be read by the sensors controller.

In order to measure changes in acceleration, the sensing element must be allowed to move freely. This is usually accomplished by mounting the accelerometer on flexible support structures. These structures allow the sensor to freely move in response to changes in acceleration. However, the support structure must also provide a suitable damping effect in order to prevent excessive vibration and reduce errors caused by high frequency inputs.

The H3LIS100DL accelerometer has an operating range of -40°C to +85°C and is capable of detecting dynamic acceleration changes as low as ±2.1g at a bandwidth of 15 to 500Hz. It also features noise reduction technology and has an integrated low noise filter that ensures consistent readings. The accelerometer offers a user-selectable output data rate between 1Hz and 12.5kHz. It also provides an SPI and I2C digital interface.

The H3LIS100DL is ideal for applications that require low power consumption. It is also highly suited for use in industrial applications, such as load monitoring, instrumentation, control, and medical systems. The accelerometer can also be used in mobile devices, such as phones and tablets, as it is able to detect acceleration changes at high precision, while consuming very little power.

The specific data is subject to PDF, and the above content is for reference