H4BBT-10105-W6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper wires are simple electrical connects used as a brief circuit across two conductors to create a new type of circuit. Jumper wires come in various types, sizes, and lengths, and they can be made with either an insulated or non-insulated conductor. Typically, when used in digital logic circuits, the insulated wires are adequate, but additional secure connections may require the use of non-insulated connections.

The popular H4BBT-10105-W6 jumper wire is a pre-crimped lead that is typically paired with a 10-pin shrouded socket. It is designed to facilitate solderless breadboard use and includes segmented (individually soldered) wires that can be used to create custom wiring configurations.

H4BBT-10105-W6 jumper wires have a critically important feature that allows them to be used in more complex circuit designs. The wire incorporates an electrical shunt of 0.2 ohm or less resistance. This means that when the wire is good-to-use, it will be able to carry enough current flow that it can be relied upon for low-voltage applications.

The working principle of H4BBT-10105-W6 jumper wires is quite straightforward. The wires can be easily linked and arranged to form a customized circuit that meets the requirements of a given application. In their simplest form, the wires are connected by placing one wire\'s mating end into the corresponding slot on the other\'s mating end. Once the two connections have been made successfully, all that’s left to do is arrange the wires as desired to form the completed circuit.

Pre-Crimped Leads

Pre-crimped leads are metal wires and wires that are already crimped in place with metal connectors and ready for use. Rather than having to crimp wires to a metal connector or solder wires to a soldered joint connector, when using pre-crimped leads, the wires are plugged into the common connector and a PCB substrate.

The use of pre-crimped leads can reduce costs, improve reliability and reduce the number of components needed when completing a PCB layout. However, the use of pre-crimped leads must be used with caution, as incorrect usage of the leads can lead to stress related failure or unexpected behavior in the circuit.

The H4BBT-10105-W6 pre-crimped leads offer the convenience of eliminating the need for additional crimping and soldering, and they are widely used in PCB designs. The leads feature segmented wires that have been crimped onto a 10-pin shrouded socket. This allows for the creation of very complex circuits without the need for lengthy wiring connections. The leads are also designed as low-resistance conductors, which is important when dealing with high current flows and low-voltage applications.

The working principle of H4BBT-10105-W6 pre-crimped leads is quite simple as well. The metal connectors are inserted into the appropriate slots on the PCB substrate, and the leads are then connected to the metal connector with appropriate wiring procedures. The leads are also designed to be able to handle higher currents and require less maintenance since they don’t need to be crimped or soldered.

The specific data is subject to PDF, and the above content is for reference